Dumble with reverb - completed pics
Moderators: pompeiisneaks, Colossal
-
amplifiednation
- Posts: 2091
- Joined: Sun Dec 26, 2010 6:19 pm
- Location: Boston
- Contact:
Dumble with reverb - completed pics
#124 style amp with tweaked Normster style reverb
Designed the chassis and eyelet boards in Solidworks and had them punch pressed.
Designed the chassis and eyelet boards in Solidworks and had them punch pressed.
You do not have the required permissions to view the files attached to this post.
Last edited by amplifiednation on Fri Nov 11, 2016 2:26 am, edited 3 times in total.
-
amplifiednation
- Posts: 2091
- Joined: Sun Dec 26, 2010 6:19 pm
- Location: Boston
- Contact:
Re: Dumble with reverb - completed pics
Eyelet holes a perfect .128". The rounded corners are awesome, very smooth G10. Cleaned with isopropyl alcohol.
You do not have the required permissions to view the files attached to this post.
- dorrisant
- Posts: 2790
- Joined: Tue Sep 21, 2010 1:27 pm
- Location: Somewhere between a river and a cornfield
- Contact:
Re: Dumble with reverb - completed pics
Tell us more!!
"Education is what you're left with after you have forgotten what you have learned" - Enzo
-
amplifiednation
- Posts: 2091
- Joined: Sun Dec 26, 2010 6:19 pm
- Location: Boston
- Contact:
Re: Dumble with reverb - completed pics
low plate classic with a few tweaks
100w 6L6
Ran the coax and wired up the tone stack RG188
100w 6L6
Ran the coax and wired up the tone stack RG188
You do not have the required permissions to view the files attached to this post.
-
telentubes
- Posts: 897
- Joined: Mon May 24, 2010 11:29 pm
- Location: Bellingham, WA.
- Contact:
Re: Dumble with reverb - completed pics
Way to go Taylor. Can't wait to see how this project develops.
Re: Dumble with reverb - completed pics
Lined chassis look great and boards turned very nice.
Will be looking for the sound clips
Niki
Will be looking for the sound clips
Niki
Re: Dumble with reverb - completed pics
Are you doing pre or post reverb?
Here's a post reverb a customer wanted, and with tremolo.
Here's a post reverb a customer wanted, and with tremolo.
You do not have the required permissions to view the files attached to this post.
-
amplifiednation
- Posts: 2091
- Joined: Sun Dec 26, 2010 6:19 pm
- Location: Boston
- Contact:
Re: Dumble with reverb - completed pics
Post OD. Coming off the master and going right back to the same spot. I've gotten good results using the 1 tube design but I think the paralleled driver tube sounds fuller.
I haven't tried the pre.
V1/V2
I haven't tried the pre.
V1/V2
You do not have the required permissions to view the files attached to this post.
Re: Dumble with reverb - completed pics
Really great looking amp Taylor.
Re: Dumble with reverb - completed pics
Aaron this looks very nice.
What tremolo did you implement?
And both - what global NFB values you used?
Thanks in advance,
Niki
What tremolo did you implement?
And both - what global NFB values you used?
Thanks in advance,
Niki
Re: Dumble with reverb - completed pics
For this amp I used the bias tremolo.
Re: Dumble with reverb - completed pics
Looks really good Taylor. Big project to put together but it looks like you're off to a great start. Good Luck!
Why Aye Man
-
amplifiednation
- Posts: 2091
- Joined: Sun Dec 26, 2010 6:19 pm
- Location: Boston
- Contact:
Re: Dumble with reverb - completed pics
Thanks guys
Bias/rectifier/relay supply all loaded up on a side mount board. Matching G10 spacer and some nylon washers keeping the connections isolated from the chassis
Footswitch wiring. Leds on Lower Lugs
Bias/rectifier/relay supply all loaded up on a side mount board. Matching G10 spacer and some nylon washers keeping the connections isolated from the chassis
Footswitch wiring. Leds on Lower Lugs
You do not have the required permissions to view the files attached to this post.
-
amplifiednation
- Posts: 2091
- Joined: Sun Dec 26, 2010 6:19 pm
- Location: Boston
- Contact:
Board
Loaded up the board
You do not have the required permissions to view the files attached to this post.
-
amplifiednation
- Posts: 2091
- Joined: Sun Dec 26, 2010 6:19 pm
- Location: Boston
- Contact:
Re: Dumble with reverb - completed pics
Ah well kinda just got after this one today...fire her up tomorrow.
This was all lead-free solder with Kester 48 Flux. Pretty killer stuff, it wets like crazy. Smells awful though.
230v export transformer with aux relay transformer can get a little messy with the extra wires, but it's pretty clean overall. The rounded G10 boards are too cool. I decided to go one tube reverb on this one, we will see how big the effect is.
[img:5991:3472]http://i.imgur.com/aL80Ert.jpg[/img]
[img:6000:4000]http://i.imgur.com/VPyXlRQ.jpg[/img]
[img:6000:4000]http://i.imgur.com/PZ8AIhC.jpg[/img]
[img:6000:4000]http://i.imgur.com/HsgNZ98.jpg[/img]
[img:6000:4000]http://i.imgur.com/qcBVfoH.jpg[/img]
[img:6000:4000]http://i.imgur.com/nXfzypE.jpg[/img]
This was all lead-free solder with Kester 48 Flux. Pretty killer stuff, it wets like crazy. Smells awful though.
230v export transformer with aux relay transformer can get a little messy with the extra wires, but it's pretty clean overall. The rounded G10 boards are too cool. I decided to go one tube reverb on this one, we will see how big the effect is.
[img:5991:3472]http://i.imgur.com/aL80Ert.jpg[/img]
[img:6000:4000]http://i.imgur.com/VPyXlRQ.jpg[/img]
[img:6000:4000]http://i.imgur.com/PZ8AIhC.jpg[/img]
[img:6000:4000]http://i.imgur.com/HsgNZ98.jpg[/img]
[img:6000:4000]http://i.imgur.com/qcBVfoH.jpg[/img]
[img:6000:4000]http://i.imgur.com/nXfzypE.jpg[/img]
Amplified Nation
www.amplifiednation.com
@ampnation
www.amplifiednation.com
@ampnation