mojo 30% taper pots?

Chris Brown · Post by **Chris Brown** » Thu Aug 14, 2014 9:38 pm

Has anyone tried the 30% taper pots from mojotone? I just grabbed a couple of 250Ks and a 500K for my upcoming build. The 500K is knurled only but the 250Ks are solid shaft.

ToneMerc · Post by **ToneMerc** » Thu Aug 14, 2014 9:59 pm

Chris Brown wrote:Has anyone tried the 30% taper pots from mojotone? I just grabbed a couple of 250Ks and a 500K for my upcoming build. The 500K is knurled only but the 250Ks are solid shaft.

I will have to try a couple and see how they plot against the new CTS 30% tapers from the guitar parts outfit in Germany. The German outfit the tapers are normally about 27-28% and shafts are knurled, but I have used shaft bushings on them. If these from Mojo work out, there's a domestic supply and it beats searching the earth for vintage Fender pulls for a correct taper pot.

Now only if they will get a batch made in 1Meg!!!

TM

Charlie Wilson · Post by **Charlie Wilson** » Thu Aug 14, 2014 10:11 pm

Hello, Fender sells CTS 30% taper pots in 250k and 1 meg. They call them J taper.
CW

jelle · Post by **jelle** » Thu Aug 14, 2014 10:57 pm

Who wants to do a run of these, incl 1M-J? Full size, solid shaft?

Chris Brown · Post by **Chris Brown** » Thu Aug 14, 2014 11:15 pm

I can only find 1M J taper as pcb mount / snap in... looks like angela had some 24mm solder lug types but they are out of stock

dreric · Post by **dreric** » Thu Aug 14, 2014 11:31 pm

http://www.ebay.com/itm/Fender-Bassman- ... 19e741016a

4 x 2-35 250K
3 x 999K

real cts, real 2-35 taper

I got some of these. They need to be cleaned but I haven't found a dud yet.

Chris Brown · Post by **Chris Brown** » Thu Aug 14, 2014 11:41 pm

dreric wrote:http://www.ebay.com/itm/Fender-Bassman- ... 19e741016a

4 x 2-35 250K
3 x 999K

real cts, real 2-35 taper

I got some of these. They need to be cleaned but I haven't found a dud yet.

Good find! I just ordered one... guess I need to dig out the deoxit.

Chris Brown · Post by **Chris Brown** » Thu Aug 14, 2014 11:44 pm

I'm guessing HD is H taper and D shaft

ToneMerc · Post by **ToneMerc** » Fri Aug 15, 2014 12:16 am

Chris Brown wrote:I'm guessing HD is H taper and D shaft

Linear taper, solid shaft

TM

Chris Brown · Post by **Chris Brown** » Fri Aug 15, 2014 1:15 am

ToneMerc wrote:
Chris Brown wrote:I'm guessing HD is H taper and D shaft
Linear taper, solid shaft

TM

that's no fun

FuzzFaceBuilder · Post by **FuzzFaceBuilder** » Fri Aug 15, 2014 1:26 am

Here's the info on the J taper pots:

www.ctscorp.com/components/Datasheets/450g.pdf

Charlie Wilson · Post by **Charlie Wilson** » Fri Aug 15, 2014 5:59 am

Hello, CTS labeled their linear 1 meg pots 999k to make it easier to tell them from audio ones.
CW

Aaron · Post by **Aaron** » Fri Aug 15, 2014 6:22 am

So H is 25% taper?

I just bought a couple anyway.

Charlie Wilson · Post by **Charlie Wilson** » Fri Aug 15, 2014 3:37 pm

Sorry Chris, your question was is H taper 25% and I don't know but I do know anytime you see the 999k pots they are linear. I purchased one also.
CW

Chris Brown · Post by **Chris Brown** » Fri Aug 15, 2014 3:51 pm

Aaron wrote:So H is 25% taper?

I just bought a couple anyway.

As far as I can tell Fender H taper is 25% but the HDs aren't H taper.

5 each for 2-35 is awesomeness... I haven't been able to find any that I could afford until now.

Tube Amp Archive

mojo 30% taper pots?

mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?

Re: mojo 30% taper pots?