Meet Meredith..
Moderators: pompeiisneaks, Colossal
-
JamesHealey
- Posts: 477
- Joined: Thu Aug 28, 2008 5:34 pm
- Location: Leeds, UK
Meet Meredith..
Here is my latest piece of work.. a Liverpool clone using a Pacific OT 6k6.
2n2 + 2n2 Ceramic / 68k RC Filter
1k5 Grid stopper on V2
This is how I believe the later Liverpools were done.
2n2 + 2n2 Ceramic / 68k RC Filter
1k5 Grid stopper on V2
This is how I believe the later Liverpools were done.
You do not have the required permissions to view the files attached to this post.
-
JamesHealey
- Posts: 477
- Joined: Thu Aug 28, 2008 5:34 pm
- Location: Leeds, UK
Re: Meet Meredith..
and here is what she sounds like!
You do not have the required permissions to view the files attached to this post.
Re: Meet Meredith..
Hey James,
Nice work! Sounds pretty killer. For the distortion I think I can hear a bit of Brian May in there (We Are The Champions). It's really got nice harmonics. What speaker and cab did you use for the recording?
Could you elaborate on choice for the R/C filter a bit?
Nice work! Sounds pretty killer. For the distortion I think I can hear a bit of Brian May in there (We Are The Champions). It's really got nice harmonics. What speaker and cab did you use for the recording?
Could you elaborate on choice for the R/C filter a bit?
-
JamesHealey
- Posts: 477
- Joined: Thu Aug 28, 2008 5:34 pm
- Location: Leeds, UK
Re: Meet Meredith..
The reason for my RC filter choice was this letter from Ken to Glen, describing a tweak for the Liverpool amp that he states he does to all the new Liverpool amps.
You do not have the required permissions to view the files attached to this post.
-
JamesHealey
- Posts: 477
- Joined: Thu Aug 28, 2008 5:34 pm
- Location: Leeds, UK
Re: Meet Meredith..
Cheap Marshall 1x10 speaker cab with a G10L-35 Celestion
Ideal for home use to keep the volume down I believe these are only like 93dB sensitivity also using an attenuator I made which is what causes the tad strangeness to the bottom end of the tone, that disappears when you use the amp unattenuated but thats simply too loud for Sunday morning around here.
Ideal for home use to keep the volume down I believe these are only like 93dB sensitivity also using an attenuator I made which is what causes the tad strangeness to the bottom end of the tone, that disappears when you use the amp unattenuated but thats simply too loud for Sunday morning around here.
Re: Meet Meredith..
Excellent James, thanks. Ah, ok, I have seen paralleled caps of dissimilar dielectrics on Wreck amps before: it's cool to see the letter where that inspiration came from. Interesting about the added grid stopper; but that's just good business.
Regards,
Dave
Regards,
Dave
Pool Build
Congrats James - nice build.
Was she difficult to get under control ? How's the noise floor ?
I think I'll add the second 0.002 cap.
Have fun with her !
Was she difficult to get under control ? How's the noise floor ?
I think I'll add the second 0.002 cap.
Have fun with her !
Why Aye Man
-
JamesHealey
- Posts: 477
- Joined: Thu Aug 28, 2008 5:34 pm
- Location: Leeds, UK
Re: Meet Meredith..
Hi Bob, not really moving the treble pot wire a bit, shortening the presence and getting the grid wires to the power tubes down to the deck.
and it was perfectly stable.
There's a tad more hum than I'd like but the hum in the recording is from my monitor and pickups not the amp, at gig levels nobody would notice the hum.
and it was perfectly stable.
There's a tad more hum than I'd like but the hum in the recording is from my monitor and pickups not the amp, at gig levels nobody would notice the hum.
Last edited by JamesHealey on Sun Oct 24, 2010 12:33 pm, edited 1 time in total.
Re: Meet Meredith..
Great job James and I liked your clip that amp has some nice low volume cleaner tones and shreds
like crazy.
-
funkmeblue
- Posts: 485
- Joined: Mon Mar 13, 2006 4:17 am
- Location: akron, ohio
Re: Meet Meredith..
very nice.......I did the same mods to my 2 holer after reading the letter from ken to glen and am much happier now.
anything worth doing, is worth doing right
-
funkmeblue
- Posts: 485
- Joined: Mon Mar 13, 2006 4:17 am
- Location: akron, ohio
Re: Meet Meredith..
I also noticed that tammy has the diodes on the el84's like the express.
anything worth doing, is worth doing right