price for Transformers

[danotron]

Whats a good price for a set of Pacifc transformr (PT and OT)? for and express bild.

[rawnster]

I'm getting a new set from Pacific next week for about $240.

[redshark]

I just got a set from Allyn, it was 170.

I have a question....does anyone has the wiring diagram for the pacific set, both power and output...thanks!!

[M Fowler]

Well here the OT, I'm at work so I have to fine these by search.

[rawnster]

I just got a set from Allyn, it was 170.

I have a question....does anyone has the wiring diagram for the pacific set, both power and output...thanks!!

Great price! I needed a 5V tap on the PT, hence the added price from Pacific.

[redshark]

express with tube rectifier? that sounds good!!

by the way, thanks guys I have the info on the trannies.....


does RJ still sells the vectorboard replica?

[rawnster]

express with tube rectifier? that sounds good!!

by the way, thanks guys I have the info on the trannies.....


does RJ still sells the vectorboard replica?

Actually, I'm trying the Pacific trannies for a big bottle rocket-type build. It should be interesting at best.

[redshark]

is that a rocket with kt66's and GZ34?

if that is the case I would like to recommend gold lion reissue kt66, is good!!!, better than chinese and JJ's.
I used it on a JTM45 build, great tone.

[rawnster]

yes kt66s would be correct. I was wondering about which brand of tube to use. I was going to try a few different ones. I bet those Gold Lion reissues sound terrific. A little spendy though, I bet.

[redshark]

I used chinese first, then JJ and then Gold lions. I think they have the best breakup, and in a tw inspired build they will make a diference for sure. I would spend the little extra again if I needed KT66's, trust me is worth it.

[rawnster]

I used chinese first, then JJ and then Gold lions. I think they have the best breakup, and in a tw inspired build they will make a diference for sure. I would spend the little extra again if I needed KT66's, trust me is worth it.

Nice! Thanks for the advice. Where did you get yours?

http://www.dougstubes.com
http://www.kcanostubes.com
???

[redshark]

Tube depot and they were nicely matched. Only 1 or 2 mA diference.

[M Fowler]

Here is the PT schematic.

[rooster]

redshark - What was the brand OT you used for the JTM45 build? I used a stock Marshall version and was not too impressed actually. What is the secondary impedence? The Marshall OT was 7500 ohms, BTW.

I have never tried the Gold Lion RIs but I have tried the Genelex KT66s here, originals. Finally ended up with the J/Js. Now I will rethink this.

[redshark]

I used a heyboer output transformer for my JTm45.
I haven't heard real genelex kt66 which are supposed to be really good but as said before I tested 3 diferent new production kt66s and i can say is that BY FAR gold lion reissue is the best, at least to my ears.