Hi,
I'm going to build a 2x12'' cab with two red,white and blues in it. Anyone has d*mble or suitable drawings for couple of 12'' ?
cheers,
2 x 12'' cab drawings
Moderators: pompeiisneaks, Colossal
-
skyboltone
- Posts: 2287
- Joined: Wed May 10, 2006 7:02 pm
- Location: Sparks, NV, where nowhere looks like home.
Alexander's open back cabinet research unrevealed.
Take a close look at this cabinet. I have looked everywhere for the dimensions of that hole because I built that exact cabinet a long time ago. I never throw anything away but I can't find the drawing Howard gave me. That's an Altec 417-8H in there. I've got an -8C here and it measures 12.125 inches in diameter. You should be able to estimate something close, double it and make it vertical and have a nice open back set. Lets take a stab at it. I think you draw two 9" circles whose centers are 5.75" apart and cut them together. Something like that. Double the square inches for the twin.
[IMG:658:600]http://i4.tinypic.com/15iaq08.jpg[/img]
I sure like that pedal. I'm gonna build one just like it.
Good Luck and thank Rob Livesey for the pictures
Dan
[IMG:658:600]http://i4.tinypic.com/15iaq08.jpg[/img]
I sure like that pedal. I'm gonna build one just like it.
Good Luck and thank Rob Livesey for the pictures
Dan
The Last of the World's Great Human Beings
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Re: 2 x 12'' cab drawings
12 x 20 3/4 x 26 1/2 are external dimensions. The hole in the back panel is 7 x 14 with a 3.5 inch radius at each end.
Pictured below is actually a Two Rock cab copy of a Dumble cab. With Tone Tubby speakers and a MKIIC+ head.
[img:375:500]http://home.comcast.net/~908ssp/DSCN1074copy.jpg[/img]
Pictured below is actually a Two Rock cab copy of a Dumble cab. With Tone Tubby speakers and a MKIIC+ head.
[img:375:500]http://home.comcast.net/~908ssp/DSCN1074copy.jpg[/img]
Alex
TheCageWreck and Glaswerks SOD100
TheCageWreck and Glaswerks SOD100
Re: 2 x 12'' cab drawings
Hey, that amp looks alot like mine! What an odd coincidence. 
The specs I used are:
Cab = 20" High x 10 1/4" Deep x 20 3/4" Wide
Rear baffle = 16" high
Oval = 11.5" x 9"
For cab dimensions for a 2 x 12", check out a two rock 2 x 12.
Edit: Looks like you already got it.
The specs I used are:
Cab = 20" High x 10 1/4" Deep x 20 3/4" Wide
Rear baffle = 16" high
Oval = 11.5" x 9"
For cab dimensions for a 2 x 12", check out a two rock 2 x 12.
Edit: Looks like you already got it.
Re: 2 x 12'' cab drawings
Hello,
Thanks alot to everyone
Now it will be easy to start building.
Btw. anyone has Eminence 'red,white and blues' + Eminence 'The Tonker' in a same cab ?
cheers,
Thanks alot to everyone
Now it will be easy to start building. Btw. anyone has Eminence 'red,white and blues' + Eminence 'The Tonker' in a same cab ?
cheers,
mat
-
skyboltone
- Posts: 2287
- Joined: Wed May 10, 2006 7:02 pm
- Location: Sparks, NV, where nowhere looks like home.
Re: 2 x 12'' cab drawings
Normster, are you talking about the separator between the chassis and the speaker enclosure as the rear baffle?Normster wrote:Hey, that amp looks alot like mine! What an odd coincidence.
The specs I used are:
Cab = 20" High x 10 1/4" Deep x 20 3/4" Wide
Rear baffle = 16" high
Oval = 11.5" x 9"
For cab dimensions for a 2 x 12", check out a two rock 2 x 12.
Edit: Looks like you already got it.
Baffled in Sausalito
Dan
The Last of the World's Great Human Beings
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Seek immediate medical attention if you suddenly go either deaf or blind.
If you put the Federal Government in charge of the Sahara Desert, in five years time there would be a shortage of sand.
Re: 2 x 12'' cab drawings
No, actually those are my combo dimensions in case Mat wanted to build a cab the same size. Sorry, that was kind of confusing. 
BTW, pretty similar, eh?
[img:640:480]http://bad-domain/DumbleRepro/DSC01923.JPG[/img]
BTW, pretty similar, eh?
[img:640:480]http://bad-domain/DumbleRepro/DSC01923.JPG[/img]
