Egnater ohmage

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
User avatar
Reeltarded
Posts: 10189
Joined: Sat Feb 14, 2009 4:38 am
Location: GA USA

Egnater ohmage

Post by Reeltarded »

Rebel has 3 outs for 4\8\16/

I need two 4 ohm holes. Egnater apparently takes weekends off! Does anyone know if I use the 4, does the 8 become 4?

Doesn't sound like it.. I need a pigtail, huh?

=|
User avatar
selloutrr
Posts: 3694
Joined: Sun Oct 14, 2007 2:44 am
Location: Southern California

Re: Egnater ohmage

Post by selloutrr »

running two mismatched taps on the ot at once can cause strain. your best off to daisy chain the cabinets meter the speaker cable and use the proper imp.
My Daughter Build Stone Henge
User avatar
Reeltarded
Posts: 10189
Joined: Sat Feb 14, 2009 4:38 am
Location: GA USA

Re: Egnater ohmage

Post by Reeltarded »

Thanks.. I wasn't sure if the rating stayed constant if the next lower jack was used, not being an electronics gooorooo.

Appreciate the reply.
User avatar
Structo
Posts: 15446
Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon

Re: Egnater ohmage

Post by Structo »

Not familiar with that amp but you should be able to look inside the chassis to see how the speaker(s) jacks are wired.

Is there one jack with an impedance switch or multiple jacks?
Tom

Don't let that smoke out!
Post Reply