Looking for pot
Moderators: pompeiisneaks, Colossal
Looking for pot
Does anyone have any idea where/if I could find a push-pull bass tone pot for an 80's Laney AOR series?
Thanks
Thanks
Re: Looking for pot
Talk to Jimmy down the street he has some Indica..........oh wait.
Potentiometer!
What value?
Potentiometer!
What value?
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Looking for pot
Not sure, here's a schematic. http://www.schematicheaven.com/newamps/laney_aor30.pdfStructo wrote:Talk to Jimmy down the street he has some Indica..........oh wait.
Potentiometer!
What value?
Did I mention I'm a noob
Re: Looking for pot
So it's the bass pot that is bad.
It push/pulls for boost?
That is a 1 Meg ohm audio taper or log taper pot.
Can you see it?
It looks like the switch is just a SPST (single pole single throw).
Look down about mid way for the CTS 1M push/pull audio taper pot.
Does it look like this?
[img:163:122]http://www.hoffmanamps.com/MyStore/cata ... chpull.jpg[/img]
http://www.hoffmanamps.com/MyStore/perl ... =220960326
It push/pulls for boost?
That is a 1 Meg ohm audio taper or log taper pot.
Can you see it?
It looks like the switch is just a SPST (single pole single throw).
Look down about mid way for the CTS 1M push/pull audio taper pot.
Does it look like this?
[img:163:122]http://www.hoffmanamps.com/MyStore/cata ... chpull.jpg[/img]
http://www.hoffmanamps.com/MyStore/perl ... =220960326
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Looking for pot
Correct, it pulls for boost. It looks similar to that but a little bulkier. I'll have to look at it later (I'm at work) and see if it has the same amount of tabs on it. Thanks for your help!Structo wrote:So it's the bass pot that is bad.
It push/pulls for boost?
That is a 1 Meg ohm audio taper or log taper pot.
Can you see it?
It looks like the switch is just a SPST (single pole single throw).
Look down about mid way for the CTS 1M push/pull audio taper pot.
Does it look like this?
[img:163:122]http://www.hoffmanamps.com/MyStore/cata ... chpull.jpg[/img]
http://www.hoffmanamps.com/MyStore/perl ... =220960326
Re: Looking for pot
That amp has a boost for everything treble, mid and bass. You better stock up on push/pull pots.
Mark
Mark
Re: Looking for pot
I have some 1 Meg Push Pull pots in stock
http://www.apexjr.com/Bourns.htm
3/4 down on this page at $1.50 each, Also have 250K too.
Steve @ Apex Jr.
http://www.apexjr.com/Bourns.htm
3/4 down on this page at $1.50 each, Also have 250K too.
Steve @ Apex Jr.
Re: Looking for pot
If you get the CTS version, it's easy to make any value you need. CTS pots disassemble easily and you can swap the resistance track from another CTS pot to meet your requirements. Yes, you should stock up. They're getting a little harder to find these days. CTS will still make them, but the minimum order size is daunting unless you're a distributor.
Re: Looking for pot
Both 1 Meg and the 250K I have in stock are CTS
and they have the fender numbers on the part...
Steve @ Apex Jr.
and they have the fender numbers on the part...
Steve @ Apex Jr.
Re: Looking for pot
Sativa typically will make the amp sound better to you.Structo wrote:Talk to Jimmy down the street he has some Indica..........oh wait.
Potentiometer!
What value?