Has anyone installed an Ironsounds FX Loop board into an already completed d-clone build? If so, did you locate it inside the chassis or elsewhere in the cabinet? If you have pics to show how you positioned and mounted it, I'd sure like to see them.
Thanks in advance!
Brian
Ironsounds FX Loop Board... Goes Where?
Moderators: pompeiisneaks, Colossal
Ironsounds FX Loop Board... Goes Where?
"Let's face it, the non HRMs are easier to play, there, I've said it." - Gil Ayan... AND HE"S IN GOOD COMPANY!
Black chassis' availble: http://cepedals.com/Dumble-Style-Chassis.html
Black chassis' availble: http://cepedals.com/Dumble-Style-Chassis.html
Re: Ironsounds FX Loop Board... Goes Where?
What kind of chassis?
I've done one in a D Lite chassis. Added it after the amp was completed - but, I planned from the start to add it. Would be a much tighter squeeze in a standard 4 holer.
I've done one in a D Lite chassis. Added it after the amp was completed - but, I planned from the start to add it. Would be a much tighter squeeze in a standard 4 holer.
You do not have the required permissions to view the files attached to this post.
Deric®
Re: Ironsounds FX Loop Board... Goes Where?
Thanks Deric!
The loop is for a Ceriatone (not mine - for a fellow I know with one who's looking for some advice). If you're familiar with what Nik has done with his Overtone Special, the chassis is already drilled out such that adding the Ironsounds board in like you did would probably not work very well. But thanks for the great pics - I'll going study them carefully to see if it's possible or if I have to look at another way. Now that you know the challenge - any comments?
B.
The loop is for a Ceriatone (not mine - for a fellow I know with one who's looking for some advice). If you're familiar with what Nik has done with his Overtone Special, the chassis is already drilled out such that adding the Ironsounds board in like you did would probably not work very well. But thanks for the great pics - I'll going study them carefully to see if it's possible or if I have to look at another way. Now that you know the challenge - any comments?
B.
"Let's face it, the non HRMs are easier to play, there, I've said it." - Gil Ayan... AND HE"S IN GOOD COMPANY!
Black chassis' availble: http://cepedals.com/Dumble-Style-Chassis.html
Black chassis' availble: http://cepedals.com/Dumble-Style-Chassis.html
Re: Ironsounds FX Loop Board... Goes Where?
That's going to be quite the challenge isn't it?
The OTS's rear panel is pretty full isn't it?
Not sure where you woud put it.
Will it fit where it has the existing FX loop in and out?
The OTS's rear panel is pretty full isn't it?
Not sure where you woud put it.
Will it fit where it has the existing FX loop in and out?
Tom
Don't let that smoke out!
Don't let that smoke out!