How does it look? Express build.

[leleduke]

Its going slow but this is what I have so far.
[IMG767]http://i5.photobucket.com/albums/y167/l ... 0_3699.jpg[/img]
[IMG767]http://i5.photobucket.com/albums/y167/l ... 700_00.jpg[/img]
[IMG767]http://i5.photobucket.com/albums/y167/l ... 0_3701.jpg[/img]

[fzfwyv]

Keep it slow. I find the best amps i build are the ones I spend a little time here and a little time there. Keeps me focused on 1 thing.

[leleduke]

Better pix
[IMG767]http://i5.photobucket.com/albums/y167/l ... 0_3705.jpg[/img]
[IMG767]http://i5.photobucket.com/albums/y167/l ... 0_3706.jpg[/img]
[IMG767]http://i5.photobucket.com/albums/y167/l ... 0_3707.jpg[/img]

[M Fowler]

leleduke,

Your off to a good start. Keep us posted.

Mark

[guitarsnguns04]

looking good

[Richie]

check the phase inverter, you have the plates and 220k connected..
down on the end of the board.. the bias connection should be a junction where the 220ks meet. the 100k and 82k feed off the junction of the B+ there..

[leleduke]

check the phase inverter, you have the plates and 220k connected..
down on the end of the board.. the bias connection should be a junction where the 220ks meet. the 100k and 82k feed off the junction of the B+ there..

Great eye. Thanks

MD

[leleduke]

check the phase inverter, you have the plates and 220k connected..
down on the end of the board.. the bias connection should be a junction where the 220ks meet. the 100k and 82k feed off the junction of the B+ there..

Great eye. Thanks

MD

[leleduke]

check the phase inverter, you have the plates and 220k connected..
down on the end of the board.. the bias connection should be a junction where the 220ks meet. the 100k and 82k feed off the junction of the B+ there..

Great eye. Thanks

MD