5 pin jack #

tubedogsmith · Post by **tubedogsmith** » Wed Sep 24, 2008 4:34 pm

Does anyone have a part number or source for a 5 pin female jack that will work with your run-of-mill midi 5 pin cord. The typical Din parts don't.

heisthl · Post by **heisthl** » Wed Sep 24, 2008 4:50 pm

tubedogsmith · Post by **tubedogsmith** » Wed Sep 24, 2008 5:33 pm

thanks! I can populate an entire main board twice in the time it takes my to wire up a cord to a pair of those jacks!!

tubedogsmith · Post by **tubedogsmith** » Wed Sep 24, 2008 5:34 pm

thanks! I can populate an entire main board twice in the time it takes my to wire up a cord to a pair of those jacks!!

Normster · Post by **Normster** » Wed Sep 24, 2008 8:33 pm

Beware that the AES Marshall-replacement footswitches now use a 240 degree DIN instead of a 180 degree.

heisthl · Post by **heisthl** » Wed Sep 24, 2008 10:33 pm

Normster wrote:Beware that the AES Marshall-replacement footswitches now use a 240 degree DIN instead of a 180 degree.

Yeah those are 60 degree and this pn works:
http://www.mouser.com/Search/ProductDet ... 20Pw%3d%3d

I just keep both 'cause you never know what AES (CE_dist) is going to ship

Tube Amp Archive