80's ODS completed

jelle · Post by **jelle** » Wed Aug 27, 2008 5:41 pm

Recently I completed a nice sounding 80's ODS with build in Dumbleator. I called it the JWATER

Very versatile amp and takes strats very well. This one is a keeper!

jelle

Structo · Post by **Structo** » Wed Aug 27, 2008 6:44 pm

Very nice looking cab and amp.

Is that a suede covering?

How about a gut shot or three?

bigmik · Post by **bigmik** » Wed Aug 27, 2008 8:20 pm

very cool looking amp,I'm a sucker for suede.I agree with structo let's see what makes her tick

jelle · Post by **jelle** » Thu Aug 28, 2008 11:27 pm

Yup, Suede.

I will make gut shots. Probably this weekend. I gooped it though.
I'm in the process of building a Bluesmaster as well.

Jelle

bigmik · Post by **bigmik** » Fri Aug 29, 2008 12:50 am

did you play it before and after goop to see if you could hear the difference?

tonelab2 · Post by **tonelab2** » Fri Aug 29, 2008 2:37 pm

Woh... that is real nice. Had to do a double take.

jelle · Post by **jelle** » Mon Sep 08, 2008 5:18 am

Pics!

Before I forget, Sven from this forum helped me with designing of the faceplates.

Jelle

thyx · Post by **thyx** » Mon Sep 08, 2008 2:37 pm

jelle wrote: I gooped it though.

Why?

jelle · Post by **jelle** » Mon Sep 08, 2008 3:50 pm

Because it is done.

thyx · Post by **thyx** » Mon Sep 08, 2008 4:01 pm

jelle wrote:Because it is done.

Hmmm...I suppose that means I'll have to goop my SSS when I'm done with it.

jelle · Post by **jelle** » Mon Sep 08, 2008 4:51 pm

thyx wrote:
Hmmm...I suppose that means I'll have to goop my SSS when I'm done with it.

hey, it's your SSS when you build it.... The permatex RTV is easy to remove. If you really want to protect your ckt then use epoxy. Please post pics when you are done with it, it sounds like a cool project!:D

For those interested: my ODS is a 100K plate load non-HRM with skyline EQ.

Jelle

erwin_ve · Post by **erwin_ve** » Mon Sep 08, 2008 6:02 pm

Hi Jelle, Nice build! Het ziet er gelikt uit .
Any surprises under the permatex?

jelle · Post by **jelle** » Mon Sep 08, 2008 7:42 pm

Thanks!

No surprises...I did use separate masters on this non HRM.

mat · Post by **mat** » Mon Sep 08, 2008 8:24 pm

jelle wrote:Thanks!

No surprises...I did use separate masters on this non HRM.

Congrats jelle ! Really good looking build ! Btw. what values did You use for the OD master and OD level pots ?

Any chance to hear it with a strat ?

thyx · Post by **thyx** » Mon Sep 08, 2008 8:45 pm

jelle wrote: hey, it's your SSS when you build it.... The permatex RTV is easy to remove. If you really want to protect your ckt then use epoxy. Please post pics when you are done with it, it sounds like a cool project!:D

Jelle

Hey...not even sure what an SSS is exactly, so I'm going by what I do know and making up the rest. Sort of "SSS-inspired". I'm quite certain some of the circuit will be unique...but thanks to input from folks on this board, I've got the power amp down to a T, more or less. The filter section will roll off 1/2 dB per step at 82 and 5K. Though I won't build it into this unit, there is provision (circuit-wise) for reverb or an effects loop, or both, without boogering up the filter section. Using a Bassman 100 head-cab and chassis that was completely destroyed (picked up up for a song). Using 5 12AX7s in the pre-amp, with some being cathode-followers (in addition to those post-PI). It'll be 75 watts, though (2 X GE 6550A)...I'm not into tinitus.

Now...back to your regularly scheduled programming...

Tube Amp Archive

80's ODS completed

80's ODS completed

Re: 80's ODS completed

Re: 80's ODS completed

Re: 80's ODS completed

Re: 80's ODS completed

Re: 80's ODS completed

Re: 80's ODS completed

re

Re: 80's ODS completed

re

Re: re

Re: 80's ODS completed

Re: 80's ODS completed

Re: 80's ODS completed

Re: re