Almost Done with head cab... Feet and bolts?

[Plague]

Hello again,

What kind and size of nuts,bolts, and washers do I get to secure the chassi to the cab?

I looked in the excel parts list and it completely confused me.

Also, are the feet attached separately? Or are they attached to the chassi through the same hole?

Thanks,

Tyler

[guitarsnguns04]

I used 1/4" -20 X1 1/2 and I attached through the rubber feet but the originals in the pics were mounted with separate holes next to the attached feet.

[Plague]

I used 1/4" -20 X1 1/2 and I attached through the rubber feet but the originals in the pics were mounted with separate holes next to the attached feet.

Thanks for the help...

My Marshall chassi has some square nuts seemingly permanently attached to the chassi. The bolt/screw goes up through the cab and into the square nut which holds still so it can tighten.

If i use your suggestion, what does the screw lock into?

[57goldtop]

My chassis is the Ceriatone chassis, it came with the square nuts which slot into the chassis. The bolts that came with the kit are the same as M6 bolt used in Marshalls, same threading and size.... so you can use those.

I drilled the holes in my cab slightly oversized and washers to cover.

[fishy]

If you look at the build guide, there is some detail on mouting the chassis in its new home. Recommend a template to drill the holes in the cabinet if you have not done so already.

[Plague]

If you look at the build guide, there is some detail on mouting the chassis in its new home. Recommend a template to drill the holes in the cabinet if you have not done so already.

Thanks Fishy