LED Wiring 4 Dlator

[UltraHookedOnPhonix]

I've got my Dlator up and running (I'll post pics soon).

There's one issue: the LED doesn't fire up.

I used the LED wiring seen on the #124 schem where cathode of LED meets cathode of rectifier, that doesn't work. Will the schematic below work?

[IMG:688:704]http://i205.photobucket.com/albums/bb17 ... Dlator.jpg[/img]

Much appreciated!

[odourboy]

The #124 schematic seems to be in error. Yours should work.

[heisthl]

remove the 330 and instead use a resistor less than 100 ohms (47R works good) and just connect it to ground, leaving the LED and 1n4007 like your diagram.

[Funkalicousgroove]

Your schematic should be just fine, try switching the wires to the LED in your current config, LED's work on neg voltage too.

[UltraHookedOnPhonix]

Thanks fellas! That did the trick.

I'll post pictures of my new Dlator in a new thread right now.