Hi, I am looking for vintage style connectors that were used on the old B&H Jensen speakers. I need either a made up cable or the male and female connectors.
If you happen to know where to source these items.
Jenson B&H connector
Moderators: pompeiisneaks, Colossal
Jenson B&H connector
You do not have the required permissions to view the files attached to this post.
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
1 others liked this
Re: Jenson B&H connector
Why don’t you use modern Speakon connectors?
Why does it have to those?
Why does it have to those?
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Re: Jenson B&H connector
To keep it original for now, I want to convert one end to a 1/4" jack.
Thanks
Thanks
-
Stevem
- Posts: 5144
- Joined: Fri Jan 24, 2014 3:01 pm
- Location: 1/3rd the way out one of the arms of the Milkyway.
Re: Jenson B&H connector
You will need to look at military electronics surplus sites to find that , or many some of the radio electronics sites that have a chat board you could post a question and picture up on.
When I die, I want to go like my Grandfather did, peacefully in his sleep.
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
Not screaming like the passengers in his car!
Cutting out a man's tongue does not mean he’s a liar, but it does show that you fear the truth he might speak about you!
-
thetragichero
- Posts: 478
- Joined: Tue Sep 10, 2019 7:46 pm
Re: Jenson B&H connector
i too would suggest speakon (or one of those speakon jacks with a 1/4" jack inside if you can find it), but this site may have what you're looking for: https://www.surplussales.com/
PRR wrote: Plotting loadlines is only for the truly desperate, or terminally bored.
Re: Jenson B&H connector
Thanks for the intel.
A
A
Re: Jenson B&H connector
These are somewhat similar. If it’s one with the weird plug directly on the speaker, it might be a decent replacement.
https://www.taydaelectronics.com/2-pins ... -gx16.html
https://www.taydaelectronics.com/2-pins ... -gx16.html
There’s a 12mm version as well.
https://www.taydaelectronics.com/2-pins ... -gx16.html
https://www.taydaelectronics.com/2-pins ... -gx16.html
There’s a 12mm version as well.