,,, any thoughts?Thanks so much in advance for your help~
Stay well~
Kenny
Tight Soldering Spot, Help Needed
Moderators: pompeiisneaks, Colossal
Tight Soldering Spot, Help Needed
Good day & hope all are well~ If you check out my picture, you'll see those 3 dip switches, & the 2 end switches need to be replaced, but my technician can't get in between those 2 green wafers to unsolder the bottoms of the switches, and the wafers don't easily separate. Who locally could I turn to to help tackle this tricky job,,, a jeweler, a blacksmith 
,,, any thoughts?
Thanks so much in advance for your help~
Stay well~
Kenny
,,, any thoughts?Thanks so much in advance for your help~
Stay well~
Kenny
-
thetragichero
- Posts: 478
- Joined: Tue Sep 10, 2019 7:46 pm
Re: Tight Soldering Spot, Help Needed
I'm not seeing a picture
PRR wrote: Plotting loadlines is only for the truly desperate, or terminally bored.
Re: Tight Soldering Spot, Help Needed
You do not have the required permissions to view the files attached to this post.
-
thetragichero
- Posts: 478
- Joined: Tue Sep 10, 2019 7:46 pm
Re: Tight Soldering Spot, Help Needed
how are the boards connected to each other? rivets?
PRR wrote: Plotting loadlines is only for the truly desperate, or terminally bored.