Uhhh.. I think Dave's speaker is 8.
Imagine the load. It would be two semi trucks full of resistors backed up to a substation to power the fans. Too noisy to use in the studio.
Subtle circuit difference, massive difference in tone
Moderators: pompeiisneaks, Colossal
-
Reeltarded
- Posts: 10189
- Joined: Sat Feb 14, 2009 4:38 am
- Location: GA USA
Re: Subtle circuit difference, massive difference in tone
Uhhh.. I think Dave's speaker is 8.
Imagine the load. It would be two semi trucks full of resistors backed up to a substation to power the fans. Too noisy to use in the studio.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Re: Subtle circuit difference, massive difference in tone
This seems about right:
I moved the 470k/500p after the volume control. Seems my theory was correct. Though it didn't add as much low end as I anticipated, which is good as the amp has plenty now, maybe just a bit more low mids. Seemed to make it a bit more crunchy, probably due to the grid current limiting of the resistor.
I moved the 470k/500p after the volume control. Seems my theory was correct. Though it didn't add as much low end as I anticipated, which is good as the amp has plenty now, maybe just a bit more low mids. Seemed to make it a bit more crunchy, probably due to the grid current limiting of the resistor.