Working on a Tweed Bassman (5e6a) for a friend. New power cord, remove death cap, filter caps etc.
There is a .05u/600v cap from the standby switch to ground. It has been replaced with a 600v 715 series cap. Should this be removed or replaced with a safety rated cap?
http://ampwares.com/schematics/bassman_5e6a.pdf
Cap on Standby Switch
Moderators: pompeiisneaks, Colossal
-
sluckey
- Posts: 3528
- Joined: Sun Jul 22, 2007 7:48 pm
- Location: Mobile, AL
- Contact:
1 others liked this
Re: Cap on Standby Switch
No, it's fine.Should this be removed or replaced with a safety rated cap?