Heater elevation before or after vvr?

[arjepsen]

Hey.
I'm almost ready to start building my own version of the 65 amps soho.
Here's my schematic:
https://www.dropbox.com/s/3huyb66peuips ... a.pdf?dl=0

My question is regarding the heater elevation (R34,35 C18).
Should this be tapped off the psu string before or after the vvr??

Regards
Anders

[martin manning]

It might not make a huge difference, but I'd put it on the screen node to get the ripple way down low.