ToneMerc wrote:
When I get home later I might install the pair of JJ 5881's. I think if I install a JJ 12ax7 at V1 the voltage will drop an additional 8-9 volts. I will roll some tubes and get a baseline on where the voltages will fall using the small and big bottle power tubes.
Head cab, not sure whether blonde or brown. I think blonde would be kind of cool.
TM
Nice plan
Agree about blonde, are you using brown faceplates?
Good question, after I changed tubes it sat idle on the dummy load for about an hour. Hopefully I will get chance to hear it this weekend if I'm not playing with drones.
Good question, after I changed tubes it sat idle on the dummy load for about an hour. Hopefully I will get chance to hear it this weekend if I'm not playing with drones.
TM
Looking forward to your future posts
btw drones? sounds interesting
Always thought one could probably have a blast causing trouble in a populated area
D
Hi ToneMerc:
I am staring to build one of these, and was going to add a bias Pot
like you have.
what size of resistor on the pot ( lug1?) do you have going to ground?
also you said you are using 5881's ~ is that tranny TO40 - a 4k?
I'll probably use 6v6's as I have a 6.6k 20 watt OT
joeboo88 wrote:Hi ToneMerc:
I am staring to build one of these, and was going to add a bias Pot
like you have.
what size of resistor on the pot ( lug1?) do you have going to ground?
also you said you are using 5881's ~ is that tranny TO40 - a 4k?
I'll probably use 6v6's as I have a 6.6k 20 watt OT
How does she sound TM?
I'm thinking about a 1 x 12 combo build. Might add reverb.
Exceptionally elegant build - you make it look easy.
Or we make it look difficult...
