It does not seem possible to use a "valve-spec" 3.5k:8 OPT in the schematic as shown.teemuk wrote:About that Trace Elliot power amp architecture...
Understanding Power Amp Distortion
Moderators: pompeiisneaks, Colossal
Re: Understanding Power Amp Distortion
Yeah But
Looks like a LTP connected to a transformer to me. Is it valve spec? Only research would tell but the fact, I think, the fact is that inductor is going to have an effect on the tone that is different then a strictly resistive output from a transistor and there should be some 2nd order harmonics from the transformer.
silverfox.
silverfox.
Re: Yeah But
Just want to verify where the 3.5k OPT figure came from...