I did a huge mistake, now I need help!!!

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

GERPUD
Posts: 100
Joined: Tue Dec 23, 2014 9:44 pm
Location: Canada

I did a huge mistake, now I need help!!!

Post by GERPUD »

I'll make it clear right away: I did too many things at the same time and I did a dumb ass move.

After doing few mods in my amp, I turned the switch on with no tubes and no speakers....
The light was on for 1-2 seconds and then the fuse blew.
Now, with everything connected, the fuse keep blowing.
It a single ended amp. I read 258ohm on the primary of the OT with my meter and 0.5ohm on secondary.

My guess is that I blew the OT, but I need a confirmation.

Thanks
User avatar
mhartman
Posts: 611
Joined: Sun Jun 15, 2008 5:43 pm

Re: I did a huge mistake, now I need help!!!

Post by mhartman »

Picture. Big, clear pictures are needed.
bal704
Posts: 351
Joined: Tue Sep 20, 2011 10:45 pm
Location: USA

Re: I did a huge mistake, now I need help!!!

Post by bal704 »

With no power tubes in, you should't be blowing a OT. You might check your mods for shorts etc.
GERPUD
Posts: 100
Joined: Tue Dec 23, 2014 9:44 pm
Location: Canada

Re: I did a huge mistake, now I need help!!!

Post by GERPUD »

So no tubes and no speaker shouldn't do any harm?

So I'll check my mods
tubeswell
Posts: 2337
Joined: Thu Mar 27, 2008 6:42 am
Location: Wellington. NZ

Re: I did a huge mistake, now I need help!!!

Post by tubeswell »

Check your modding to ensure that you haven't inadvertently shorted anywhere on the B+ rail to any part of the ground return side of the circuit.
He who dies with the most tubes... wins
GERPUD
Posts: 100
Joined: Tue Dec 23, 2014 9:44 pm
Location: Canada

Re: I did a huge mistake, now I need help!!!

Post by GERPUD »

Is an electrolytic filtering cap plugged wrong way could be cause that problem?
bal704
Posts: 351
Joined: Tue Sep 20, 2011 10:45 pm
Location: USA

Re: I did a huge mistake, now I need help!!!

Post by bal704 »

It would help to know what the mods were.
GERPUD
Posts: 100
Joined: Tue Dec 23, 2014 9:44 pm
Location: Canada

Re: I did a huge mistake, now I need help!!!

Post by GERPUD »

I added a filtering stage before the OT.
47uF + choke.
I just say few seconds ago that I installed the cap backwards...

In theses situations, I tell myself that those who do nothing do not make mistakes, and that experience is the sum of our errors...
User avatar
martin manning
Posts: 14308
Joined: Sun Jul 06, 2008 12:43 am
Location: 39°06' N 84°30' W

Re: I did a huge mistake, now I need help!!!

Post by martin manning »

GERPUD wrote:Is an electrolytic filtering cap plugged wrong way could be cause that problem?
That'd do it.
User avatar
lord preset
Posts: 447
Joined: Tue Aug 27, 2013 3:06 am
Location: San Diego

Re: I did a huge mistake, now I need help!!!

Post by lord preset »

martin manning wrote:
GERPUD wrote:Is an electrolytic filtering cap plugged wrong way could be cause that problem?
That'd do it.
I've done that. :oops: One of many ways to let the smoke out.

I would like to say everyone here has done that too, but it probably isn't true.
Jana
Posts: 1314
Joined: Sun Sep 07, 2008 10:40 pm
Location: Minnesota

Re: I did a huge mistake, now I need help!!!

Post by Jana »

I would never do anything like that! If I had done something like that, I would have a story to tell about how the end of the cap popped out and scared me so much that I jumped and made contact with the B+ rail and got the jolt of my life and then the amp fell off the cradle and broke a tube which was a very spectacular light show with the sparks and I remember seeing all this as I was falling off the stool I was sitting on. You can always tell when that happens to someone--they write run-on sentences. But I would never do that.
What?
User avatar
Leo_Gnardo
Posts: 2585
Joined: Thu Sep 27, 2012 1:33 pm
Location: Dogpatch-on-Hudson

Re: I did a huge mistake, now I need help!!!

Post by Leo_Gnardo »

lord preset wrote: I would like to say everyone here has done that too, but it probably isn't true.
Sign me up, in a moment of distraction I've done that. Also had caps that were mismarked as to which end's which :evil: Never wrecked a transformer, but it does have a negative effect on a good mood, mostly due to Scottish genes: "crap, there's a cap I can't sell now. Money be gone."
down technical blind alleys . . .
User avatar
xtian
Posts: 7263
Joined: Mon Apr 19, 2010 8:15 pm
Location: Chico, CA
Contact:

Re: I did a huge mistake, now I need help!!!

Post by xtian »

Well, no one I know certainly maybe did not get a high voltage burn today from the fluorescent fixture he may or may not have been replacing the ballast in...
You do not have the required permissions to view the files attached to this post.
I build and repair tube amps. http://amps.monkeymatic.com
Tone Lover
Posts: 261
Joined: Tue Apr 27, 2010 4:39 am
Location: Everett Wa.

Re: I did a huge mistake, now I need help!!!

Post by Tone Lover »

Its amazing how stinky letting the smoke out of a PT would be. But I dont know anyone who would do that. :roll:
Bill
matt h
Posts: 1224
Joined: Fri May 12, 2006 2:26 am
Location: New England

Re: I did a huge mistake, now I need help!!!

Post by matt h »

(deleted)
Last edited by matt h on Fri Mar 27, 2015 4:02 pm, edited 1 time in total.
Post Reply