or redone.  The wooden one is the 102 internal loop with assorted gizmos that has been much discussed lately.  The Carolina Blue one is a 50-watt 2nd gen with a bunch of extras.  
What's next?  I'm thinking a Princeton Reverb.  sh
			
			
						Two more done
Moderators: pompeiisneaks, Colossal
- Luthierwnc
- Posts: 998
- Joined: Sat Feb 18, 2006 10:59 am
- Location: Asheville, NC
Two more done
You do not have the required permissions to view the files attached to this post.
			
									
						Re: Two more done
Nice pair.  Would like to build one some day.
Princeton Reverb is what I learn more guitar licks on then any other amp.
			
			
									
									
						Princeton Reverb is what I learn more guitar licks on then any other amp.
- norburybrook
- Posts: 3290
- Joined: Mon Jan 06, 2014 12:47 am
- Location: London
- Contact:
Re: Two more done
Love the light blue with the marshal grill 
I've had the same thoughts about what next to build, Princeton reverb
apparently the bias trem is a real pig to dial in.
MArcus
			
			
									
									
						
I've had the same thoughts about what next to build, Princeton reverb

apparently the bias trem is a real pig to dial in.
MArcus
- Luthierwnc
- Posts: 998
- Joined: Sat Feb 18, 2006 10:59 am
- Location: Asheville, NC
Re: Two more done
Phazor:  you can't build just one.  If I don't count these twice, I've made 8 of them.
Norburybrook: I've done one before and didn't have any trouble. I used an adjustable fixed bias that looked something like the attached schematic. There are some trem mods on this that I haven't tried before.
I don't still have that amp. IIRC, I used 7591 tubes with a DR output transformer. One of the D-clones is a 7591 amp with a 5879 pentode for the OD driver. That and a Gemini cover the 7591 needs but I don't have a push/pull 6V6 amp right now. So that's next. sh
			
			
						Norburybrook: I've done one before and didn't have any trouble. I used an adjustable fixed bias that looked something like the attached schematic. There are some trem mods on this that I haven't tried before.
I don't still have that amp. IIRC, I used 7591 tubes with a DR output transformer. One of the D-clones is a 7591 amp with a 5879 pentode for the OD driver. That and a Gemini cover the 7591 needs but I don't have a push/pull 6V6 amp right now. So that's next. sh
You do not have the required permissions to view the files attached to this post.
			
									
						
