part number/link to ODS 5 pin chassis DIN

[norburybrook]

Hi,

The mouser part number for the footswitch DIN on the layouts in the files section is a switchraft but doesn't have the 3 mounting points that the Dumble chassis has.

Anyone know where to get hold of a 3 bolt DIN chassis connector that mounts in the Clone Chassis I have?


TIA


Marcus

[ToneMerc]

IIRC, those chassis are setup for the XLR type not the DIN. So you need a 4 or 5 pin XLR female.

The mouser part for the female as seen in 2nd Gen's are 502-C4F

TM

[norburybrook]

thanks,

just checked that and it's a regular 3 pin XLR, I need a 5 pin.

Will have a browse to see if I can find one.


Marcus

[ToneMerc]

thanks,

just checked that and it's a regular 3 pin XLR, I need a 5 pin.

Will have a browse to see if I can find one.


Marcus

Marcus, ignore the Mouser displayed picture and look at part number or data sheet. The middle character ( 502- CxF) is the number of pins.

C3F= 3 pins, female
C4F= 4 pins, female
C5F = 5 pins, female

http://www.mouser.com/ProductDetail/Swi ... pVs6yCo%3d


TM

[norburybrook]

Ah... got it...


Thanks for that,


Now back to my BOM

Marcus