CE Distributions new chassis need front panel info

[M Fowler]

Anyone made a faceplate and backplate for the CE Distributions chassis see pdf below?

No need to start new if some one has and I can get the panel layout from you.

Mark

[M Fowler]

I want to go input, bright switch, volume, bass, mid, treble for ch1

gain, bass, mid, treble, master volume, presence for ch2

standby, power, fender pilot

10 pot holes spaced 1.5"

Would make a nice 50w or 100w two channel amp.

[dcribbs1412]

Almost grabbed one with my last order
for a SSS style build,still might(also have SLO boards)
looks like a SLO chassis
Is it decent?

Darin

[hylaphone]

I'm not seeing this on CE's site -- have a link?

[M Fowler]

Almost grabbed one with my last order
for a SSS style build,still might(also have SLO boards)
looks like a SLO chassis
Is it decent?

Darin

Very nice chassis yes.

[M Fowler]

I'm not seeing this on CE's site -- have a link?

It is under enclosures; pre-drilled https://www.cedist.com/products/P-HCH01

[dorrisant]

Whatcha building Mark?

[M Fowler]

Two channel amp Fender clean channel one and Marshall high gain channel two. Something like a Soldano Lucky 13 50w.

But I think I'll use this chassis for a 150w four KT88 two channel fire breather for a local player that uses 5150 amps.

[Gaz]

Two channel amp Fender clean channel one and Marshall high gain channel two. Something like a Soldano Lucky 13 50w.

But I think I'll use this chassis for a 150w four KT88 two channel fire breather for a local player that uses 5150 amps.

...Wonder if that can support 150W iron. It looks to be aluminum, so it just depends on the gauge I guess and how close you mount the iron to the edge.

[M Fowler]

No problem handling the iron besides I can always add blocks on the ends.