Hey all,
Been scouring the interwebs looking for the physical dimensions of the Dynaco PC-706, and have found nothing. Does anyone have those dimensions, or a PC-706 on hand to measure?
Thanks,
Hale
Dynaco PC-706 dimensions?
Moderators: pompeiisneaks, Colossal
-
FuzzFaceBuilder
- Posts: 137
- Joined: Wed Mar 26, 2008 8:22 am
- Location: Honolulu, HI
-
Leo_Gnardo
- Posts: 2585
- Joined: Thu Sep 27, 2012 1:33 pm
- Location: Dogpatch-on-Hudson
Re: Dynaco PC-706 dimensions?
If that's the same PT that Sunn used in its Coliseum PA 120 here's what I measure: 4.25" tall, 3.75" across stack, 5.00" across bells. Plus wires sticking out the bottom of course.
The output circuit in this amp, as in many Sunns, copy of Dyna MkIII but with twice the tubes. Uses a MKIII OT housed in a big can, and it DOES turn out 120W @ clip to 2, 4 or 8 ohms. Them's some tough transformers!
The output circuit in this amp, as in many Sunns, copy of Dyna MkIII but with twice the tubes. Uses a MKIII OT housed in a big can, and it DOES turn out 120W @ clip to 2, 4 or 8 ohms. Them's some tough transformers!
down technical blind alleys . . .