Help Me identify this "THING". Thanks

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

User avatar
LeftyStrat
Posts: 3117
Joined: Fri Jan 14, 2005 6:58 pm
Location: Marietta, SC, but my heart and two of my kids are in Seattle, WA

Re: Help Me identify this "THING". Thanks

Post by LeftyStrat »

billc wrote:
Phil_S wrote:Many of these old amplifiers can't be safely powered up without servicing them first. Doing the wrong thing can blow the transformers or worse, and then your find is a big doorstop. If you don't know what you are doing, ask. You'll get help. Remember, once you let the smoke out, you can't put it back in.
unless it came from British vehicle wiring...har har...

[img:400:300]http://www3.telus.net/bc_triumph_regist ... kekit2.jpg[/img]
LOL

Lucas, Prince of Darkness.

Q:Why do Brits drink their beer warm?
A: Lucas Refrigeration.

I owned a Triumph Spitfire whose electrical system was possessed by a spirit with a sick sense of humor. Every time I went to replace a lamp it would start working again.
It's never too late to have a happy childhood.
Butterbone
Posts: 18
Joined: Sun May 11, 2014 12:10 am
Location: United States

Flipping

Post by Butterbone »

Well sorry to say but the bulk of the old mics are already flipped.

Unless you count 70's and 80's as old. I still have the bulk of the mics from those decades. Most of them are xlr3 Shure and Electro Voice and realistic.

Guy from Tennessee hit up my craigslist ad as he was driving home from Ohio and bought the whole case after picking through it for less than 5 minutes.
The only name brand I recognized as Shure Commando 430. He acted like he was unfamiliar with it but his visible excitement said otherwise lol. I was afraid he was either going to have a heart attack or a priapism. Neither of which did I want to be a witness to.

The Stradolin 554 also left with him once it powered up and we hooked up my "Found'r Stratotester" no name guitar to it and loud but seemingly correct noises came out.


He low balled me on the el-bee because of the buzz so I am hanging on to it. The material on the cabinet is...generic and old and falling apart. It's almost like the whole thing was covered in Gaffers tape. came density and fibrous weave but a little more fine.

So new question.
Is it considered taboo to re-condition or resurface these old amp cabinets???

I have a roll of linen backed mahogany veneer and it's about twice as much as I would need to completely resurface the El-Bee cabinet. I think it would look nice.

I added pictures of some of the mic's that are left, and a stereo amp and the Harmony Piggy back.
You do not have the required permissions to view the files attached to this post.
I do stuff
User avatar
Leo_Gnardo
Posts: 2585
Joined: Thu Sep 27, 2012 1:33 pm
Location: Dogpatch-on-Hudson

Re: Flipping

Post by Leo_Gnardo »

Butterbone wrote:Well sorry to say but the bulk of the old mics are already flipped.

Unless you count 70's and 80's as old. I still have the bulk of the mics from those decades. Most of them are xlr3 Shure and Electro Voice and realistic
Good on you for making the sale. Would be nice to see a snap of what went anyway, just for laughs. No Telefunken U47's I take it. I s'pose you could list the other mics in the TAG 4-sale section even tho they're not amps or guitars.
down technical blind alleys . . .
Butterbone
Posts: 18
Joined: Sun May 11, 2014 12:10 am
Location: United States

Pictures!

Post by Butterbone »

OK.
I was able to get the monster out of the box without breaking anything.

So here is the list:

4 Black RCA Radiotron tubes;
Sn7
6SJ7
GF6
6SJ7

1 RCA Radiotron tube with 83 in a stop sign outline.

1 KenRad K9R with 80 in a stop sign outline.

Stancor transformers:

1 P-4024
1 C or G 1402
1 A-3802
1 A-4210

And I'll put up the pictures I got.

Thanks for lookin it over guys.
You do not have the required permissions to view the files attached to this post.
I do stuff
Butterbone
Posts: 18
Joined: Sun May 11, 2014 12:10 am
Location: United States

Re: Help Me identify this "THING". Thanks

Post by Butterbone »

More pictures.
You do not have the required permissions to view the files attached to this post.
I do stuff
Butterbone
Posts: 18
Joined: Sun May 11, 2014 12:10 am
Location: United States

Re: Help Me identify this "THING". Thanks

Post by Butterbone »

Maybe some more pictures will help figure out what this thing is for.

PA?
Guitar Amp?

I'm curious why it would have 4 inputs but only 3 output sockets?
You do not have the required permissions to view the files attached to this post.
I do stuff
Post Reply