Any Cap Kits for recap of my7 1973 Superlead?

[Jerry2013]

Im going toi be recapping my 1973 Marshall Poinmt to point Superlead. Does anyone have a lolst of can caps and reisitors I'll need to replace, and all other 'Lytics?
iT WOULD NBE NICE IF SOMEONE HAD ALL THE RIGHT PARTS , AND COULD SELL ME A KIT.

[Reeltarded]

All the filter caps and only the bias caps.

6) 50u+50u multisection 500v cans. Don't get 450v for a Superlead! Not kidding..

2) 10u 160v electrolytics for bias

Every amp place has the right parts. Valvestorm specializes in Marshall.

[gldtp99]

Valvestorm has what you need on one page: http://valvestorm.com/Products/Componen ... ectrolytic

Without pics of your amp I'm not 100% sure--- but most likely you need:

1) 50/50uF @500V dual cans--- 6 ea.--- the F&T's listed there are very good

2) 10uF@150V bias caps---- 2 ea. -----pick your brand but I've been using the BC's

3) 220uF or 330uF cathode bypass cap--- 1 ea.---- see what value is in your amp now and order the same value---- they're listed under "Cathode Bypass Caps"----- pick your brand.

[Reeltarded]

I don't change the normal channel's bypass. I have never had a bad one.

[gldtp99]

I'd change it, why not ? Then he'd have all fresh e-caps installed at the same time----- the orig ones almost never go bad, I know but for @$2.50 ? Worth it just so he feels he's done a complete job.
I mostly noticed that we both recommended Valvestorm, writing at the same time---- ..........................gldtp99

[Bob S]

Coupla Marshall Metro guys if ever I saw them.

[Reeltarded]

hehe

If it's the silver can 250u I don't do anything but wave at it on the way by.

HAY!!