6v6/6L6 Valve Junior Conversion 5F2a

[MattHahn]

Hi Guys,
i have just finished a 5f2a circuit wich i build from scratch in an Valve Junior chassis using the VJs Transformers.
I used a mix of 1N4007 and 5u4GB for the rectifier, just because i had it lying around.
I used the stock 5F2a circuit and changed nothing to date.
For the heater supply i had to build a small board with a 7805 voltage regulator supplied from the 12v winding on the PT.That worked.
So, i tried both 6V6 and 6L6 and both are working good, the 6l6 is about twice the level and i have played it for ours nonstop and---no problems.
I thought i would blow up the OT but all is fine.
Any mods suggested?

[David Root]

Sounds good I'll bet! If it ain't broke, don't fix it, no mods necessary. Good move to go with regulated DC on the heaters, much quieter.