It can only get better from here on.
Bastard Baby Bluesmaster
Moderators: pompeiisneaks, Colossal
Re: Bastard Baby Bluesmaster
Sounds good!
It can only get better from here on.
It can only get better from here on.
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Bastard Baby Bluesmaster
Thanks for listening, Tom.
Here is a clip from this morning after bumping up the HRM bass a fairy's pubic hair and backing off the mids and treble a little. OD entrance at 26k. I think I am just gonna close it up and play the damn thing. Cleans are very good on this one.
Here is a clip from this morning after bumping up the HRM bass a fairy's pubic hair and backing off the mids and treble a little. OD entrance at 26k. I think I am just gonna close it up and play the damn thing. Cleans are very good on this one.
You do not have the required permissions to view the files attached to this post.
Re: Bastard Baby Bluesmaster
That sounds really good.
What guitar are you playing?
What guitar are you playing?
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Bastard Baby Bluesmaster
Thanks Tom. My cheap Squier '51 with Seymour Duncan 'lil '59 in neck and Bill Lawrence L500 in bridge.
You do not have the required permissions to view the files attached to this post.
Re: Bastard Baby Bluesmaster
Nice tone and playing! Like the guitar too.
with respect, 10thtx
with respect, 10thtx
Re: Bastard Baby Bluesmaster
I suspected a humbucker.
I have one of those '51 Squier's as well.
I stuffed a Mighty Mite Motherbucker in the bridge but it don't sound like yours....
I have one of those '51 Squier's as well.
I stuffed a Mighty Mite Motherbucker in the bridge but it don't sound like yours....
Tom
Don't let that smoke out!
Don't let that smoke out!
Re: Bastard Baby Bluesmaster
Sounds wonderful to me!
-Dan
-Dan
Re: Bastard Baby Bluesmaster
Thanks for listening guys! I am not out of the woods yet..... Got an intermittent problem with the HRM board. Chop-sticking leads me to believe I have a bad wire. SHould have used stranded for that HRM riser. Now I have to dismantle something that I put the gleep on before the board was placed. That board feels like it is threaded on that bolt - which is oriented from the bottom of the main board up. WTF was I thinking....
Lesson learned for serviceability
Lesson learned for serviceability