Part No. for 3/8" flat washers anyone?

[Gaz]

I'm in need of some flat washers that come with typical Alpha pots, et al. Anyone have a Mouser or Digikey part #? Thanks!

[xtian]

534-1456

http://www.mouser.com/ProductDetail/Key ... Ti0%2fI%3d

[Gaz]

Thanks, but I'm looking for the thin flat washer, not the nut.

[Structo]

http://www.tubesandmore.com/products/R-VNUT-38

[Gaz]

Thanks, Tom, I've found that. I'm just looking for those damned washers so I can buy a bunch - I have a tone of pots without them

[Phil_S]

Try contacting Ted Weber. They are small enough to give you some personal attention. Tell them what you need and I'd be surprised if they didn't accommodate your request, and at a reasonable price. You won't need a part number.

[ApexJr.]

I stock all 3 of the 3/8" hardware for the pots and pictured on
my potentiometers page. Here is pricing.




Potentiometer and 1/4" Jack 3/8" X 32 Hardware
Nickel plated nut, stainless steel flat washer and Zinc plated star washers
10 ea $1.00
25 ea $2.25
100ea $8.00
1000ea $60.00

http://www.apexjr.com/Bourns.htm 3/4 down the page



Steve @ Apex Jr.
www.apexjr.com

[Phil_S]

+1 for Steve at Apex Jr.!

[davent]

Small Bear http://www.smallbearelec.com/servlet/Detail?no=481

[Gaz]

Thanks!