liverpool resistor question

Express, Liverpool, Rocket, Dirty Little Monster, etc.

Moderators: pompeiisneaks, Colossal

Post Reply
harris51
Posts: 103
Joined: Tue May 08, 2012 5:18 am
Location: United States

liverpool resistor question

Post by harris51 »

I noticed that some layouts have a15k resisitor on the input shielded wire running to pin 7 on the v1 and some layouts don't. Why?
Mark
Posts: 3271
Joined: Sat Jan 15, 2005 8:10 am
Location: Sydney Australia

Re: liverpool resistor question

Post by Mark »

Personal preference as far as I can tell.

When in doubt look at the Francesa shots.
Last edited by Mark on Sat Jun 02, 2012 12:37 pm, edited 1 time in total.
Yours Sincerely

Mark Abbott
User avatar
Reeltarded
Posts: 10189
Joined: Sat Feb 14, 2009 4:38 am
Location: GA USA

Re: liverpool resistor question

Post by Reeltarded »

This is the other thread but backwards now.

RF suppression.

This is the first best place in an amp to take all the life out of it.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
redshark
Posts: 822
Joined: Sun Dec 07, 2008 12:42 pm
Location: Veracruz, Mexico

Re: liverpool resistor question

Post by redshark »

Mark wrote:Personal presence as far as I can tell.

When in doubt look at the Francesa shots.
Well, now we have Ingrid as well, I wonder in reality how many "little changes" could be like those found in Ingrid. In the Trudy is also the parallel caps plus the bias is a little bit diferent than Francesca. What is legit, what is not....After putting a 33k in my express like Ingrid I didn't notice that it took away any of its life. Just saying...
User avatar
Reeltarded
Posts: 10189
Joined: Sat Feb 14, 2009 4:38 am
Location: GA USA

Re: liverpool resistor question

Post by Reeltarded »

Nor would 100k, but you'd start hearing the difference just higher than that.. or so in most amps.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
Post Reply