liverpool resistor question
Moderators: pompeiisneaks, Colossal
liverpool resistor question
I noticed that some layouts have a15k resisitor on the input shielded wire running to pin 7 on the v1 and some layouts don't. Why?
			
			
									
									
						Re: liverpool resistor question
Personal preference as far as I can tell.
When in doubt look at the Francesa shots.
			
			
													When in doubt look at the Francesa shots.
					Last edited by Mark on Sat Jun 02, 2012 12:37 pm, edited 1 time in total.
									
			
									Yours Sincerely
Mark Abbott
						Mark Abbott
- Reeltarded
 - Posts: 10189
 - Joined: Sat Feb 14, 2009 4:38 am
 - Location: GA USA
 
Re: liverpool resistor question
This is the other thread but backwards now.
RF suppression.
This is the first best place in an amp to take all the life out of it.
			
			
									
									RF suppression.
This is the first best place in an amp to take all the life out of it.
Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.
						Re: liverpool resistor question
Well, now we have Ingrid as well, I wonder in reality how many "little changes" could be like those found in Ingrid. In the Trudy is also the parallel caps plus the bias is a little bit diferent than Francesca. What is legit, what is not....After putting a 33k in my express like Ingrid I didn't notice that it took away any of its life. Just saying...Mark wrote:Personal presence as far as I can tell.
When in doubt look at the Francesa shots.
- Reeltarded
 - Posts: 10189
 - Joined: Sat Feb 14, 2009 4:38 am
 - Location: GA USA
 
Re: liverpool resistor question
Nor would 100k, but you'd start hearing the difference just higher than that.. or so in most amps.
			
			
									
									Signatures have a 255 character limit that I could abuse, but I am not Cecil B. DeMille.