Decided it didn't matter if I marked & drilled the chassis from the outside...
Offset holes would still line up if I flipped it around.
Won't do that again.
In the near future anyway.
It sucks...
Moderators: pompeiisneaks, Colossal
SCREW UPS
My latest - fitting a 25w aluminum heat sink type resistor.
Decided it didn't matter if I marked & drilled the chassis from the outside...
Offset holes would still line up if I flipped it around.
Won't do that again.
In the near future anyway.
Decided it didn't matter if I marked & drilled the chassis from the outside...
Offset holes would still line up if I flipped it around.
Won't do that again.
In the near future anyway.
Why Aye Man