Dumble 124 relay question
Moderators: pompeiisneaks, Colossal
Dumble 124 relay question
Hi everyone!
I'm sourcing parts for a 124 build. I happened across what looks to be a very close match to the relays used in this amp. I was curious if anyone knew what the differences are between the two are??? I can't find a datasheet for them.
Pictures of the 124 show.
Taiko RKTS 12G
The ones I picked up today are
Taiko RKT 12 (picture below).
Both parts cross to the same relay in the NTE cross reference book.
Thanks for all your help! Looking forward to the build. Going to take it slow, but I'm sure I'll have plenty of questions along the way. Already picked up the electrolytics and many of the Sprague PS series caps. Can't find any NOS 6PS caps in the correct values. Looks like the ones at AES are fairly new (RoHS compliant?). But that's where I sourced 'em.
-Brent
			
			
						I'm sourcing parts for a 124 build. I happened across what looks to be a very close match to the relays used in this amp. I was curious if anyone knew what the differences are between the two are??? I can't find a datasheet for them.
Pictures of the 124 show.
Taiko RKTS 12G
The ones I picked up today are
Taiko RKT 12 (picture below).
Both parts cross to the same relay in the NTE cross reference book.
Thanks for all your help! Looking forward to the build. Going to take it slow, but I'm sure I'll have plenty of questions along the way. Already picked up the electrolytics and many of the Sprague PS series caps. Can't find any NOS 6PS caps in the correct values. Looks like the ones at AES are fairly new (RoHS compliant?). But that's where I sourced 'em.
-Brent
You do not have the required permissions to view the files attached to this post.
			
									
						Re: Dumble 124 relay question
Pretty cool!
I like the clear top on those.
			
			
									
									I like the clear top on those.
Tom
Don't let that smoke out!
						Don't let that smoke out!
Re: Dumble 124 relay question
Thanks Structo! I think I got pretty lucky on these. The shop had two of them and I picked them both up. All the BOMs call for 3 relays, but I don't see where the third one is used. Is one a spare?Structo wrote:Pretty cool!
I like the clear top on those.
From what I can tell, they're the same as the relays in 0124. Looks like it's just missing the UL label so they just may be a little older.
Re: Dumble 124 relay question
You just need two. One for PAB and one for channel switching. Have fun, those look great!
Jelle
			
			
									
									
						Jelle
Re: Dumble 124 relay question
Some guys like to put the Mid Boost on the foot pedal as well so that may be why there are three relays on the BOM.
Me? I have four relays!
 
OD, PAB, Midboost and Bright on Clean Only.
			
			
									
									Me? I have four relays!
OD, PAB, Midboost and Bright on Clean Only.
Tom
Don't let that smoke out!
						Don't let that smoke out!
Re: Dumble 124 relay question
Sure.
I have the Midboost and PAB stacked one on top of the other and then the OD to the right and the Bright on Clean Only relay to the far right.
			
			
						I have the Midboost and PAB stacked one on top of the other and then the OD to the right and the Bright on Clean Only relay to the far right.
You do not have the required permissions to view the files attached to this post.
			
									Tom
Don't let that smoke out!
						Don't let that smoke out!
Re: Dumble 124 relay question
Yep and it just barely clears the top of the chassis. 
			
			
									
									Tom
Don't let that smoke out!
						Don't let that smoke out!
Re: Dumble 124 relay question
Yes, down is off, middle is bright on all the time and up is bright on clean only.
			
			
									
									Tom
Don't let that smoke out!
						Don't let that smoke out!