Source for 2k, or 2k2 pots?
Moderators: pompeiisneaks, Colossal
Source for 2k, or 2k2 pots?
Anyone have a source for 2k2 cts or alpha pots?
Re: Source for 2k, or 2k2 pots?
Why not just buy a bunch of 2K and measure them. Mine measure anywhere from 1.8 to 2.15butwhatif wrote:Anyone have a source for 2k2 cts or alpha pots?
Re: Source for 2k, or 2k2 pots?
Do you know of a source for cts or alpha 2k ?
Re: Source for 2k, or 2k2 pots?
I"ve got them from Mouser in the past.
Re: Source for 2k, or 2k2 pots?
That's strange, I could have sworn I have bought the 2K Alpha from AES before but now when I look, they don't seem to carry them.
On my last 100w build I got a NOS 2.5K Allen Bradley pot from Apex Jr.
On my last 100w build I got a NOS 2.5K Allen Bradley pot from Apex Jr.
Tom
Don't let that smoke out!
Don't let that smoke out!
- glasman
- Posts: 1446
- Joined: Wed Jan 19, 2005 10:37 pm
- Location: Afton, MN (St Croix River Valley)
- Contact:
Re: Source for 2k, or 2k2 pots?
You can always take the back off and scrape the pot up to the value you need. A couple hundred ohms is pretty easy
Gary
Gary
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification
www.glaswerks.com
Re: Source for 2k, or 2k2 pots?
I tried searching Mouser and couldn't find them. They do have them though...
http://www.mouser.com/ProductDetail/Alp ... FxcQzTA%3d
http://www.mouser.com/ProductDetail/Alp ... FxcQzTA%3d
Deric®
Re: Source for 2k, or 2k2 pots?
I use 5K pots then put a resistor in parallel in parallel. Works fine as the pot is linear taper. Then I can get an "custom" resistance I want. High resistance just means "duller" tone in regards to presence though.
- David Root
- Posts: 3540
- Joined: Fri Aug 04, 2006 3:00 pm
- Location: Chilliwack BC
Re: Source for 2k, or 2k2 pots?
I have a source for NOS Centralab 2K5 pots. They have about a 3" brass shaft which would have to be cut down. They are PCB mount type but could be used panel mount style, see pic.
I bought two, they are marked 2K but are nearer 2.5K. One is 2.50K, the other is 2.38.
I bought two, they are marked 2K but are nearer 2.5K. One is 2.50K, the other is 2.38.
You do not have the required permissions to view the files attached to this post.
Re: Source for 2k, or 2k2 pots?
Mouser has thembutwhatif wrote:Do you know of a source for cts or alpha 2k ?
http://www.mouser.com/Search/ProductDet ... Lvhb%2bg==
Re: Source for 2k, or 2k2 pots?
Thanks for the info I was able to find nos at--
http://www.surplussales.com/Potentiomet ... ted-4.html
Also they have a couple dozen knobs-very similar to the first dumble combo
type part # (KNB) PKS1106B1/4
http://www.surplussales.com/ShaftHardware/Knobs-6.html
http://www.surplussales.com/Potentiomet ... ted-4.html
Also they have a couple dozen knobs-very similar to the first dumble combo
type part # (KNB) PKS1106B1/4
http://www.surplussales.com/ShaftHardware/Knobs-6.html