Liverpool voltages - Ceriatone kit minus tx's and tubes

[klauswilliams]

Hi all

Wasn't sure if there is some central place to store voltage charts here? I've found them here and there in different posts, but nothing official. Might be useful, certainly would have been for a rookie like me. Anyway, I wanted to pitch in and list my voltages for anyone looking and also to see if they look correct to everyone. There are a tad higher than others, but in the ballpark. Amp gets waaay hot when fired up. No tube failures yet though. From what I've gathered this is to be expected?

Built from a Ceriatone kit, Heyboer trannys, JJ power tubes, mix of pre. Only value change was to swap the stock 50 ohm power tube cathode resistor with a 62 ohm.

Here are my readings (I posted elsewhere my readings without tubes, this are with tubes in):

V1: 190 pin1, 1.4 pin3, 169 pin6, 1.15 pin8
V2: 225 pin1, 2.6 pin3
V3: 203 pin1, 25 pin2, 54 pin3, 209 pin6, 30 pin7, 54 pin8

V4-V7: 11 pin3, 339 pin7, 318 pin9

heaters all 3.25

B+1: 340
B+2: 320
B+3: 270
B+4: 258
B+5: 245