Problem with my Express. Help
Moderators: pompeiisneaks, Colossal
Problem with my Express. Help
Last nite at rehearsal my amp would start breaking up as i turned my volume knob down to get a clean sound and then the signal would cut out about half way. changed tubes same thing. anyone got any idea?
Re: Problem with my Express. Help
Any news Mont ? Tell me your back to juicing your grunties Mont.
"It Happens"
Forrest Gump
Forrest Gump
Re: Problem with my Express. Help
I can't figure it out. when I bring down the guitar volume(any guitar) the amp starts to break up and then shuts off about halfway. changing tubes has no effect. plus after checking out other TW's I noticed mine does'nt have as much gain. power out the ass, but not the gain as the ones i listened to.
Re: Problem with my Express. Help
Have you tried a different guitar with it? Well nevermind...Mont wrote:I can't figure it out. when I bring down the guitar volume(any guitar) the amp starts to break up and then shuts off about halfway. changing tubes has no effect. plus after checking out other TW's I noticed mine does'nt have as much gain. power out the ass, but not the gain as the ones i listened to.
Reading comprehension is not my strong suit.
"It Happens"
Forrest Gump
Forrest Gump
Re: Problem with my Express. Help
When you said 'not as much gain as other TWs' it made me focus on your V2 hookup. I would look at the 150K resistor and make sure you have it connected correctly.
And without pics its a guess.
And without pics its a guess.
Most people stall out when fixing a mistake that they've made. Why?
Re: Problem with my Express. Help
Do you think a bias resistor could be a wrong value? Might have an effect on gain. Perhaps a bad bypass cap?
"It Happens"
Forrest Gump
Forrest Gump
Re: Problem with my Express. Help
yeah still trying to get a camera. and the 150k is hooked up according to the expess build guide.
Re: Problem with my Express. Help
I am gonna pull the bypass caps and check them.is there an acceptable tolerance for the bypass caps? guess i should have checked all the patrs first. you live you learn.
Re: Problem with my Express. Help
I would double check the values of my bias resistors and see that the caps are installed with the correct polarity. If they look good they probably are. Bypass caps affect gain. I would check the values of everything around v1 for sure. I don't know how you're set for spare parts. I always over order when I buy something so it's no big deal just to change something out. Of course, my Express is taking a dump right now as well so take it with a grain of salt.Mont wrote:I am gonna pull the bypass caps and check them.is there an acceptable tolerance for the bypass caps? guess i should have checked all the patrs first. you live you learn.
"It Happens"
Forrest Gump
Forrest Gump
Re: Problem with my Express. Help
I replaced the bypass caps still no change. anyone else got an idea?
Re: Problem with my Express. Help
pics will be your salvation. don't be shy, we've seen it all.
Most people stall out when fixing a mistake that they've made. Why?