monkey 88 progress

[leleduke]

Thanks. The only thing the cam didn't pickup was the picture frames falling off the wall the amp is very bass heavy.

MD

[leleduke]

A few more
http://www.youtube.com/watch?v=LnC4DHPJiS8
http://www.youtube.com/watch?v=1O_ak_YVGoQ

[heisthl]

That amp sounds great - good work

[Blindog]

Nice job Mark I still havn't got started on mine yet, had to have carpal tunnel surgury before the end of the year Definitley anxious to get going on it.

How did you set your HRM stack?

Mark

[leleduke]

Nice job Mark I still havn't got started on mine yet, had to have carpal tunnel surgury before the end of the year Definitley anxious to get going on it.

How did you set your HRM stack?

Mark

Thanks, the HRM stack is set pretty much flat ant the OD trimmer is set low at 20K to ground- 9:00

[leleduke]

That amp sounds great - good work

Thank you, that means alot coming from you.

[Structo]

Was the reverb on the clip only from the amp or was delay or post reverb added?

If it was from the amps reverb it sounds really good, a little heavy on that cut but very Eric Johnsonish.

[leleduke]

Was the reverb on the clip only from the amp or was delay or post reverb added?

If it was from the amps reverb it sounds really good, a little heavy on that cut but very Eric Johnsonish.

Its the verb from the amp. The delay really needs a dumbleator because the delay thins the tone of the amp some. I have a little dummy coming in soon from Moss.

MD

[Structo]

Man, that is good sounding verb then.
I thought you were adding it to the mix later or something.
Really a great sounding reverb.
Had that White Cliffs Of Dover thing going on.

[leleduke]

The amp is only running on two OP tubes on the clips. I'm still waiting on parts and tubes from brownnote. I did notice that the delay in the loop sucks the low end I guess thats why I need a dumleator.

MD

[Structo]

Yes, I am currently building a Dumbleator.

I thought it would be a pretty quick project but as with anything unfamiliar, it is taking me longer than I expected.
I've had to do some fabrication to things to make them all come together.
I'm looking forward to hear it with my amp, so I hope it works right when I plug it in.

The one thing I am a little unsure of is how to work the controls and what plugs in where.

The schematic doesn't come with an owners manual.

[Pete]

INPUT & OUTPUT connect to the amp, SEND & RETURN to the effect if you use one. HTH