Trafo for D-clone with 6550

[sergio]

What kind of Power Trafo can I use for a pair of 6550?
I usually use trafo fender type 125P5DX /125P7DX for 50w,can be suitable?
any suggestions?

Thanks Sergio

[JD0x0]

What kind of Power Trafo can I use for a pair of 6550?
I usually use trafo fender type 125P5DX /125P7DX for 50w,can be suitable?
any suggestions?

Thanks Sergio

IM using a 100 watt marshall power transformer with my (2)KT88 dumble. In most applications Kt88 tubes are swappable with 6550's but i find KT88's to sound much better IMO.

i dont think 50 watts will be enough because you need more amperage for the filament heaters and the plate voltage might not be high enough

[jelle]

I'd use 100w power iron and maybe a twin OT.

[briane]

!00 watt bassman PT and dynaco 470s OT.

Done it, its gooooooooood!

[sergio]

Hi Briane , like this? http://www.triodeelectronics.com/noname.html

My problem are the order oversea , too many fees and tax...

I'll think about

Thanks