Liverpool Project: Completed...

[v00d00blues79]

Woohoo! i just finished up my Liverpool clone last night. I haven't had a chance to test it much yet, but i am very excited about this project. I had to make some modifications to my PS layout because of space issues, but i don't think it will be too impactfull on the build. I will try and post some pics as soon as i can.

Thanks,

Andy

[v00d00blues79]

well i fired up the Liverpool for the first time last night and did some voltage checks and what not, and other than one side of the OT primary being disconnected from the power tube socket, nothing blew up... I don't have any sound coming out though. I'm going to have to start checking things out tonight when i get home. Does anyone have any information on voltages for a Liverpool clone?

Thanks,

Andy

[Mark]

Dear Andy

I would ask Chris G that question. I do have some info somewhere regarding the voltages around the circuit. I'd try doing a search and see what comes up.

I think Chris mentions in a fairly recent post something about the voltages in the power supply of his Liverpool clone.

I do recall that the voltage to the centre tap of the output transformer was 335VDC.

[Mark]

B+1=335vdc
2=312.5vdc
3=260.1vdc
4=244.5vdc
5=231.1vdc

Plate voltage=325
screen voltage=307
bias voltage=-9.42 vdc

Hope this helps
Chris G