Heater wire install on my Liverpool build
Moderators: pompeiisneaks, Colossal
Heater wire install on my Liverpool build
Hi Everbody, I noticed on a real wreck gutshot that Ken fisher went from pin 9 to 4 on the first pre then 4 to 9 then 9 to 9, 4 to 4 can anybody confirm this as true? also on the power tubes is he going 4to 4 5 to 5? Thanks so much Mike
You do not have the required permissions to view the files attached to this post.
Re: Heater wire install on my Liverpool build
Hi Mike,
Your eye is keen but indeed, this fact has been caught by the Trainwreck historians here. Guys have gone to great lengths to gain insight into Ken Fischer's genius with rigorous study of his designs. I don't know if there is any benefit to running the heaters out of phase but Ken did it on that amp.
Your eye is keen but indeed, this fact has been caught by the Trainwreck historians here. Guys have gone to great lengths to gain insight into Ken Fischer's genius with rigorous study of his designs. I don't know if there is any benefit to running the heaters out of phase but Ken did it on that amp.