Fixed!!!!! Presence control not working?

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

User avatar
glasman
Posts: 1446
Joined: Wed Jan 19, 2005 10:37 pm
Location: Afton, MN (St Croix River Valley)
Contact:

Re: Fixed!!!!! Presence control not working?

Post by glasman »

dogears wrote:You sure there Sparky?? What is .1 + .68?? ;)


Bob-I wrote:
dogears wrote:You can always tack the .68 acorss the .1 to make .78.......
Gotta keep you on track.... you'll need to series these, not across. Across would make it 1.68uF.

For the First Book of Malvino (remember him?)

Caps in parallel Add - 1.0 +.68 = 1.68uf
Caps in series = (C1xC2)/(C1+C2) = (1.0 * .68 ) / (1.0 + .68 ) = 0.040 uf.

Gary
Located in the St Croix River Valley- Afton, MN
About 5 miles south of I-94
aka K0GWA, K0 Glas Werks Amplification

www.glaswerks.com
User avatar
Bob-I
Posts: 3791
Joined: Thu Feb 02, 2006 10:06 pm
Location: Hillsborough NJ

Re: Fixed!!!!! Presence control not working?

Post by Bob-I »

LOL. .. Gary...neither of us saw the . before the 1.... :oops:
dogears
Posts: 1902
Joined: Wed Feb 01, 2006 1:29 pm

Re: Fixed!!!!! Presence control not working?

Post by dogears »

Doh...

Keith already had the .1 there. I was just saying since he wanted to try the .68, that he could paralle it as well.

Luv you guys.
keithrick
Posts: 423
Joined: Wed Mar 22, 2006 10:13 pm
Location: In front of my computer

Re: Fixed!!!!! Presence control not working?

Post by keithrick »

You guys are cracking me up! :wink:

I installed a 1uf tantalum and I now have presense! Thanks Guy's!
:D
Post Reply