heater

General discussion area for tube amps.

Moderators: pompeiisneaks, Colossal

Post Reply
Pongo316
Posts: 51
Joined: Wed Oct 18, 2006 2:40 pm

heater

Post by Pongo316 »

Did KF switch around the heaters wire in the otput section ?

eg there is a pick of francesca where it seens that on the power tubes he has swaped wires form v5 to v4 he has reversed the wires ?

i'll try and get the picture up bud i downlowded it from this site.

is this possable or am i just seeing things?
User avatar
drhulsey
Posts: 986
Joined: Sun Mar 18, 2007 3:19 am

Re: heater

Post by drhulsey »

Pongo316 wrote: Did KF switch around the heaters wire in the output section ?
Yes, you will see the heater wires out of phase. Allynmey has tried it both ways– in phase and out of phase– and it doesn't seem to make a difference.
Tim

In case the NSA is listening, KMA!
Pongo316
Posts: 51
Joined: Wed Oct 18, 2006 2:40 pm

Re: heater

Post by Pongo316 »

Thanks I'm new to this TW stuff ?

And thought I was seeing things. :shock:

On with the build :D
User avatar
drhulsey
Posts: 986
Joined: Sun Mar 18, 2007 3:19 am

Re: heater

Post by drhulsey »

Pongo316 wrote: ... And thought I was seeing things...
You'll look at those picture so much as you build that you will see LOTS of things that aren't there :!: :D In fact, here's a composite I put together from the various Francesca pics. I used it as my LO as I built my Express clone. You can magnify it a great deal and still see it very clearly.
Good Luck :!: :!:
You do not have the required permissions to view the files attached to this post.
Tim

In case the NSA is listening, KMA!
Pongo316
Posts: 51
Joined: Wed Oct 18, 2006 2:40 pm

Re: heater

Post by Pongo316 »

Thanks drhulsey

Very usefull
Post Reply