Thanks!Synchu wrote:Resistors, Dale (now Vishay/Dale) brand, metal film.
D'lite 44 BOM?
Moderators: pompeiisneaks, Colossal
-
lord preset
- Posts: 447
- Joined: Tue Aug 27, 2013 3:06 am
- Location: San Diego
Re: D'lite 44 BOM?
-
lord preset
- Posts: 447
- Joined: Tue Aug 27, 2013 3:06 am
- Location: San Diego
Re: D'lite 44 BOM?
Another few dummy questions:
1. Due to my hamfisted wiring technique I managed to break off the soldering tab for Pin 1 of one of the octal sockets. It was supposed to be tied to Pin 8 then to a bias test point. But since Pin 1 is not present in 6L6GCs is this connection really needed? From what I have read it would potentially matter if you wanted to run EL34s (which I don't plan to do), but not for 6L6GCs. I can of course just order another socket if it does matter but I am impatient and cheap
2. On the Dlite Tweaked Layout, the relay board has what appears to be a jumpered connection between pins 6 and 9 on on of the relays. Is that correct? Or is it just an under board connection to pin 6?
https://tubeamparchive.com/download/file.php?id=29707
1. Due to my hamfisted wiring technique I managed to break off the soldering tab for Pin 1 of one of the octal sockets. It was supposed to be tied to Pin 8 then to a bias test point. But since Pin 1 is not present in 6L6GCs is this connection really needed? From what I have read it would potentially matter if you wanted to run EL34s (which I don't plan to do), but not for 6L6GCs. I can of course just order another socket if it does matter but I am impatient and cheap
2. On the Dlite Tweaked Layout, the relay board has what appears to be a jumpered connection between pins 6 and 9 on on of the relays. Is that correct? Or is it just an under board connection to pin 6?
https://tubeamparchive.com/download/file.php?id=29707