First clips of the DumbleLite

Overdrive Special, Steel String Singer, Dumbleland, Odyssey, Winterland, etc. -
Members Only

Moderators: pompeiisneaks, Colossal

Post Reply
Harris
Posts: 31
Joined: Tue Feb 14, 2006 9:14 pm

Re: First clips of the DumbleLite

Post by Harris »

Norm, What value resistor did you end up using for the NFB resistor? I'm guessing that using a DR OT that you are using an 8 ohm tap?

By the way, the clips are awesome. Right up there with the best Dumble clips I've heard.
Top
Normster
Posts: 1183
Joined: Tue Feb 07, 2006 12:26 pm
Location: Sacramento, CA
Contact:
Contact Normster

Re: First clips of the DumbleLite

Post by Normster »

Harris wrote:Norm, What value resistor did you end up using for the NFB resistor? I'm guessing that using a DR OT that you are using an 8 ohm tap?

By the way, the clips are awesome. Right up there with the best Dumble clips I've heard.
Thanks! :D

The NFB is a 6k2 off of the 8 Ohm tap (still using the 390R to ground).
Top
Post Reply

Return to “Dumble Discussion”