Securing the chassis to a head cab

[MarkB]

I looked at Francesca, and couldn't see how the chassis is bolted to the head. I usually put bolts through close to the four corners from underneath to the top of the chassis, but in the Wreck the PT is close to the front of the corner, so that would be hard to do.

[dreamtone]

I would have to guess but the chassis must be like a JTM 45 with the out side flange where the mounting bolts are on the outer ends, not on the inside. If your chassis don't have that you may wan't to add a couple angle brackets.

[philmanatee]

I haven't looked at the pictures in a while but I remember a bottom plate that mounted to the chassis which had 2 threaded holes for bolts in it. Phil