David
It was mainly the bias pots I was interested in. They seem so small and fit into the space so neatly.
Yet Another #124 In Progress--Just Finished.
Moderators: pompeiisneaks, Colossal
-
greenbottle
- Posts: 40
- Joined: Mon Dec 29, 2008 3:29 am
- Location: Grafton NSW Australia
Re: Yet Another #124 In Progress--Just Finished.
Look to be standard 16mm Alpha pots. Fairly easy to find.
Technically they are not meant to handle DC voltage as they are not concentric (think that is the word).
Technically they are not meant to handle DC voltage as they are not concentric (think that is the word).
-
David Root
- Posts: 3540
- Joined: Fri Aug 04, 2006 3:00 pm
- Location: Chilliwack BC
Re: Yet Another #124 In Progress--Just Finished.
They are 12mm Alpha pots, see close-up. They are not specifically rated for DC but are rated for 150VAC, so I figured 15-20VDC across each pot at maximum 0.4 mA should be OK. The power rating is .08W and is way higher than the actual. None of them have crapped out yet.
You do not have the required permissions to view the files attached to this post.
-
greenbottle
- Posts: 40
- Joined: Mon Dec 29, 2008 3:29 am
- Location: Grafton NSW Australia
bias pots
Thank you David