Vintage Gibson G20 amp

Discussion of Speakers, Cabinets and Cabinet Building

Moderators: pompeiisneaks, Colossal

Post Reply
PoorOtis
Posts: 6
Joined: Thu Mar 28, 2013 9:50 pm
Location: United States

Vintage Gibson G20 amp

Post by PoorOtis »

I've had this amp 40plus years and the speakers out. Would you go with Jenson/Altec Lancing/JBL...or.??? Their are many options out there..whats a good choise to use in this old amp??
Thanks. :?:
David Storm
Top
tsutt
Posts: 264
Joined: Fri Jan 06, 2012 1:12 pm

Re: Vintage Gibson G20 amp

Post by tsutt »

Recone?
Top
User avatar
Structo
Posts: 15446
Joined: Wed Oct 17, 2007 1:01 am
Location: Oregon

Re: Vintage Gibson G20 amp

Post by Structo »

Cap job? Three prong plug?
Tom

Don't let that smoke out!
Top
User avatar
Phil_S
Posts: 6048
Joined: Tue Oct 23, 2007 10:12 pm
Location: Baltimore, MD

Re: Vintage Gibson G20 amp

Post by Phil_S »

I've heard these are the guys to go to for a recone.
http://www.orangecountyspeaker.com/
Top
User avatar
JazzGuitarGimp
Posts: 2357
Joined: Mon Jul 23, 2012 4:54 pm
Location: Northern CA

Re: Vintage Gibson G20 amp

Post by JazzGuitarGimp »

Phil_S wrote:I've heard these are the guys to go to for a recone.
http://www.orangecountyspeaker.com/
I can vouch. When I lived in Orange County, I used their services on a handful of occasions. Top notch work.
Lou Rossi Designs
Printed Circuit Design & Layout,
and Schematic Capture
Top
Diablo1
Posts: 163
Joined: Tue Nov 10, 2009 11:38 pm
Location: Hammond Indiana USA

Re: Vintage Gibson G20 amp

Post by Diablo1 »

You could always recone it yourself. It's a lot like amp building, initially takes some knowledge and a little skill. But it's inexpensve and satisfying knowing the job was done right. I get recone parts from Weber.
Top
Post Reply

Return to “Speakers and Cabinets”