A pile of BOM
Moderators: pompeiisneaks, Colossal
- Ron Worley
- Posts: 908
- Joined: Mon Dec 24, 2007 8:21 pm
- Location: Keller, TX
A pile of BOM
OK, I knuckled under and worked all three BOMs to get them clean and ready for the board.
Please use these versions rather than any other I've posted- lots of improvements on all three.
Feel free to note any errors on any of them.
Edit: Updated all versions 2 June 08, minor corrections on Express, more on the Liverpool, and a lot on the Rocket.
Ron
Please use these versions rather than any other I've posted- lots of improvements on all three.
Feel free to note any errors on any of them.
Edit: Updated all versions 2 June 08, minor corrections on Express, more on the Liverpool, and a lot on the Rocket.
Ron
You do not have the required permissions to view the files attached to this post.
Last edited by Ron Worley on Mon Jun 02, 2008 8:48 pm, edited 4 times in total.
Re: A pile of BOM
Thank you very much for doing this for all of us here!!!!
- Lonely Raven
- Posts: 878
- Joined: Fri Nov 16, 2007 4:09 am
- Location: Bolingbrook, IL
- Contact:
Re: A pile of BOM
Thanks for all your work on these, Ron! It's much appreciated from the overworked and overtired that you're saving a ton of time for!
Jack of all Trades,
Master of None
Master of None
Re: A pile of BOM
Ron - thanks from the colonies !!!

Re: A pile of BOM
Don't ya mean "clonies"
L eeMo
L eeMo
I bought a pair of shoes from a drug dealer the other day. I dunno what he laced them with but I’ve been tripping all day,
Re: A pile of BOM
LeeMo wrote:... Don't ya mean "clonies"...
Now, that 'ere's funny, I don't care who you are
Tim
In case the NSA is listening, KMA!
In case the NSA is listening, KMA!
Re: A pile of BOM
Does the Express BOM list the best quality parts that are relatively available? I dont want to go hunting down nos parts or stuff at antique radio shows. I just want to build an amp with the best possible componets, within reason.
- Ron Worley
- Posts: 908
- Joined: Mon Dec 24, 2007 8:21 pm
- Location: Keller, TX
Re: A pile of BOM
I built my BOMs based on the wisdom from the forum and from best commercially available. Where there is a particular KF type part (i.e. the "greenie" resistors on the power tube sockets, I note it as a comment (but provide a readily available part from Mouser or Allied).
Opinions on parts are like assholes, everyone has one... I just tried to give people a good starting point to get over the overwhelming task of sourcing parts. YMMV.....
Ron
Opinions on parts are like assholes, everyone has one... I just tried to give people a good starting point to get over the overwhelming task of sourcing parts. YMMV.....
Ron
- Ron Worley
- Posts: 908
- Joined: Mon Dec 24, 2007 8:21 pm
- Location: Keller, TX
Re: A pile of BOM
Updated versions of all three, minor hardware corrections, component changes per inputs on the Rocket.
Ron
Ron
Re: A pile of BOM
Hi Ron (and everyone else)
First time poster here.. Hello, and thanks for all that wonderful information in this forum
I think there is a tiny error in the Express BOM. On the sheet with 'Capacitors' you got the same Supplier PN for the 500pf and the 47pf caps. The number for the 500Pf cap should be 862-0551.
PeterM
First time poster here.. Hello, and thanks for all that wonderful information in this forum
I think there is a tiny error in the Express BOM. On the sheet with 'Capacitors' you got the same Supplier PN for the 500pf and the 47pf caps. The number for the 500Pf cap should be 862-0551.
PeterM
- Ron Worley
- Posts: 908
- Joined: Mon Dec 24, 2007 8:21 pm
- Location: Keller, TX
Re: A pile of BOM
Peter-
Good catch... all three BOMs have the same error.... Your eyes start to cross after staring at these things after a while....
I have updated my copies, and will post new versions when I have a few more corrections / suggestions.
Ron
Good catch... all three BOMs have the same error.... Your eyes start to cross after staring at these things after a while....
I have updated my copies, and will post new versions when I have a few more corrections / suggestions.
Ron
- Ron Worley
- Posts: 908
- Joined: Mon Dec 24, 2007 8:21 pm
- Location: Keller, TX
Re: A pile of BOM
All BOMs now with version numbers. Numerous updates on corrected part numbers, quantities, etc. per inputs from the forum.
Ron
Ron
- Ron Worley
- Posts: 908
- Joined: Mon Dec 24, 2007 8:21 pm
- Location: Keller, TX
Re: A pile of BOM
Versions 1.1 updated. Significant update to the Rocket.
Ron
Ron
Re: A pile of BOM
Thanks for the pile Ron!
I like it!!
I like it!!
- Lonely Raven
- Posts: 878
- Joined: Fri Nov 16, 2007 4:09 am
- Location: Bolingbrook, IL
- Contact:
Re: A pile of BOM
Thanks, Ron!
I'm going to be ordering my Rocket parts today!
Oh hey, you mispelled Lonely in the BOM. It's LONE ly.
Lots of people swap the E and the L...which was a PITA when they were trying to send me Pay Pal.
Not that it really matters, as I've only got a couple faceplates and logos left anyways, and I'll probably be putting them up on evilbay.
I'm going to be ordering my Rocket parts today!
Oh hey, you mispelled Lonely in the BOM. It's LONE ly.
Lots of people swap the E and the L...which was a PITA when they were trying to send me Pay Pal.
Not that it really matters, as I've only got a couple faceplates and logos left anyways, and I'll probably be putting them up on evilbay.
Jack of all Trades,
Master of None
Master of None