I've got a 5f4 Super power and output tranny.
Moderators: pompeiisneaks, Colossal
-
pinkphiloyd
- Posts: 136
- Joined: Mon Jun 13, 2011 1:01 pm
I've got a 5f4 Super power and output tranny.
They've just been sitting around forever. I wanna build something as a gift for a friend and figured I'd use them. Don't wanna build a super, though, he's a clean tone guy and only very rarely uses a boost or OD for a little grit. Anybody got any good suggestions?
Re: I've got a 5f4 Super power and output tranny.
What are the specs for the PT, or a link to the datasheet?
- martin manning
- Posts: 14308
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: I've got a 5f4 Super power and output tranny.
On the 5F4 schematic the PT delivered 415V B+ through a 5U4G to 2x 6L6 in p-p. Lots of posibilities. The OT is listed as 45216, which is well thought of I believe. Two speakers are shown wired in parallel, so it likely has a single 4-ohm output.
-
pinkphiloyd
- Posts: 136
- Joined: Mon Jun 13, 2011 1:01 pm
Re: I've got a 5f4 Super power and output tranny.
Indeed. And I'll undoubtedly overlook something awesome, so I thought I'd ask.martin manning wrote:Lots of posibilities.
Specs.
PT http://taweber.powweb.com/store/022798sch.jpg
OT is uploaded.
You do not have the required permissions to view the files attached to this post.
- martin manning
- Posts: 14308
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: I've got a 5f4 Super power and output tranny.
So is the primary of that Mojo OT 12k a-a? It is if each half is really 3k...
-
pinkphiloyd
- Posts: 136
- Joined: Mon Jun 13, 2011 1:01 pm
Re: I've got a 5f4 Super power and output tranny.
Hmmm. I've never actually checked it...
- martin manning
- Posts: 14308
- Joined: Sun Jul 06, 2008 12:43 am
- Location: 39°06' N 84°30' W
Re: I've got a 5f4 Super power and output tranny.
I'm not seriously suggesting that it is, more like whomever made the drawing doesn't know how transformers work! I think they are trying to say it's a 6k primary.
- LeftyStrat
- Posts: 3117
- Joined: Fri Jan 14, 2005 6:58 pm
- Location: Marietta, SC, but my heart and two of my kids are in Seattle, WA
Re: I've got a 5f4 Super power and output tranny.
If he's a clean guy, not sure why he wouldn't love a Blackface Super. That iron would also work for a JTM45. You could also do a Dumble 50 watt.
And I'm not seriously suggesting this, but an Ampeg VT40 is a wonderful amp and could also be built from that set.
And I'm not seriously suggesting this, but an Ampeg VT40 is a wonderful amp and could also be built from that set.
It's never too late to have a happy childhood.
Re: I've got a 5f4 Super power and output tranny.
What was the objection to the 5F4 ?
You'd still want to operate into the correct load which implies 2x12" or 2x10".
Were it me, I'd be considering something in the Blond/Brown range.
Reverb or tremolo, i.e. "Harmonic Vibrato", of interest ?
rd
You'd still want to operate into the correct load which implies 2x12" or 2x10".
Were it me, I'd be considering something in the Blond/Brown range.
Reverb or tremolo, i.e. "Harmonic Vibrato", of interest ?
rd